UNIDEN Model uh095sx Dual Band (UHF CB/AM CB) Radio
Operation
Selecting AM or FM or Dual AM+FM Band
Turn the uh095sx ON by rotating the volume control clockwise.
By pressing AM/FM you may select which band the uh095sx will receive and transmit on. When AM only is displayed the uh095sx will transmit and receive on AM CB channels which is HF Band. When FM only is displayed transmit and receive will be on UHF CB channels. When both AM and FM are displayed either AM or FM will flash reflecting the band that the uh095sx is currently on.
Setting the AM Squelch
Select AM only by pressing AM/FM . Turn the outer ring of the control to adjust the Squelch.
You must select a channel which is not in use before setting the SQUELCH control. (Selecting a Channel see p7)
Think of the squelch control as a gate. If you turn Squelch fully clockwise it raises the 'Squelch gate' so high that no signals get through.
If you turn the Squelch fully counterclockwise it lowers the 'Squelch Gate' to the extent that all signals get through - weak, medium and strong signals and noise.
To set the 'Squelch Gate' to the desired level, turn the squelch knob counterclockwise until you hear noise. Then carefully turn the Squelch knob clockwise until the noise stops. Now only strong signals get through.
6