Alpine CDM-7892R SETUP Operation, Adjusting Source Signal Levels, Switching the Tuner Mode, 17-EN

Press the g DN or f UP button to select the frequency step mode.

Press and hold the SETUP button for at least 3 seconds.

Press the g DN or f UP button to select the FM- LV (FM LEVEL) mode.

SETUP Operation

g DN BAND Rotary encoder/MODE

f UP SETUP

Adjusting Source Signal Levels

If the difference in volume level between the CD player and FM radio is too great, adjust the FM signal level as follows.

1

2

3 Press the BAND button to select the FM signal level HI (High) or LO (Low) to make the signal levels between the FM band and CD player closer.

4 Press the SETUP button to return to normal mode.

Switching the Tuner Mode

The CDM-7892R incorporates the MAX TUNE Pro for the highest quality tuner audio. Moreover, you can choose between 3 settings to suit your own personal sound preferences usage.

1 Press and hold the SETUP button for at least 3 seconds.

2 Press the g DN or f UP button to select

NORMAL.

3 Press the BAND button to switch the TUNER mode.

→NORMAL → STABLE → HI-FI

NORMAL : Standard setting

STABLE	: Noiseless priority setting
HI-FI	: Sound quality priority setting

NOTES

•The initial setting at the factory is "NORMAL."

•If you find the sound is very noisy while listening to the tuner in the HI-FI mode, we recommend you change to the NORMAL mode.

4 When the setting is completed, press the SETUP button to return to the normal mode.

Subwoofer On and Off

1	Press and hold the SETUP button for at least 3
	seconds.
2	Press the g DN or f UP button to select the
	SUB-W mode.
3	Press the BAND button to select Subwoofer ON or
	OFF.
4	Press the SETUP button after setting the SUB-W ON.
5	Press the MODE button repeatedly to select the
	SUB-W mode.
		→ SUB-W	→ BALANCE
		VOLUME ← DEFEAT ← FADER ←

Press the g DN or f UP button after selecting the SUB-W mode, and the subwoofer output phase is toggled SUBW NOR (0°) or SUBW REV (180°).

6 Turn the Rotary encoder until the desired sound is obtained in each mode.

NOTES

•Initial mode is "Subwoofer ON."

•Set to "Subwoofer OFF" unless the subwoofer is used.

Setting Frequency Step

When you tune in FM stations automatically, you can set the frequency step to 50 kHz or 100 kHz.

1 Press and hold the SETUP button for at least 3 seconds to enter the setting mode.

2

3 Press the BAND button to select the desired frequency

step (50 kHz or 100 kHz). Each time you press the BAND button, 50 kHz and 100 kHz appear alternately.

50 kHz: the unit tunes in FM stations every 50 kHz automatically.

100 kHz: the unit tunes in FM stations every 100 kHz automatically.

4 Press the SETUP button to exit the setting mode.

17-EN