Alpine CDM-7892R owner manual Setting the AUX Mode, Demonstration, 18-EN, SETUP Operation

Press the SETUP button to return to normal mode.

Press and hold the SETUP button for at least 3 seconds.

SETUP Operation

SOURCEBAND

g DN f UP SETUP

Setting the AUX Mode

You can input TV/video sound by connecting an optional "M-Bus V-Link" (M-Bus/RCA interface cable KCM-122B) to this component.

1

2 Press the g DN or f UP button to select the AUX mode.

3 Press the BAND button to toggle the mode between AUX ON and AUX OFF.

4

5 To adjust the volume, etc., first press the SOURCE button and select the AUX mode, then make the necessary adjustment.

→TUNER → CD → AUX

NOTE

When AUX ON is selected, a CD Changer cannot be used.

Demonstration

This unit has the Demonstration feature which simulates the display functions on the display panel.

1 Press and hold the SETUP button for at least 3 seconds.

2 Press the f UP or g DN button to select the "DEMO" mode.

3 Press the BAND button to turn on or off the DEMO mode.

Each press toggles between "DEMO ON" and "DEMO OFF."

If no buttons are pressed 30 seconds after the DEMO mode is turned ON. The DEMO mode then begins.

NOTE

The initial setting at the factory is "DEMO ON."

4 Press the SETUP button again to return to normal operation.

18-EN