CD Player Operation
SOURCEPreset
g DN f UP | REPEAT | M.I.X. | SCAN |
M.I.X. (Random Play)
1 Press the M.I.X. button in the play or pause mode. The M.I.X. indicator will illuminate and the tracks on the disc will be played back in a random sequence.
To cancel M.I.X. play, press the M.I.X. button again.
NOTES
•In case a
Press the F button so that the "FUNC" indicator lights up, then go to step 1.
•Press the F button to return to the normal mode. The "FUNC" indicator light goes out.
Music Sensor (Skip)
1 Momentarily press the g DN button once during CD play to return to the beginning of the current track. If you wish to access a track further back, repeatedly press until you reach the desired track.
Press the f UP button once to advance to the beginning of the next track. If you wish to access a track further ahead, press repeatedly until the desired track is reached.
NOTE
The music sensor feature is functional in the play or pause mode.
Fast Forward and Backward
1 Press and hold the g DN or f UP button to quickly move backward or forward until you reach the desired section of the track.
Repeat Play
1 Press the REPEAT button to play back repeatedly the track being played.
The RPT indicator appears and the track will be played repeatedly.
Press the REPEAT button again to deactivate the repeat play.
NOTES
•If a CD Changer is connected and the RPT ALL mode is selected, the unit repeatedly plays back all tracks on the disc selected.
→ RPT → RPT ALL → (OFF) 
•In case a
Press the F button so that the "FUNC" indicator lights up, then go to step 1.
•Press the F button to return to the normal mode. The "FUNC" indicator light goes out.
Scanning Programmes
1 Press the SCAN button to activate the Scan mode. The first 10 seconds of each track will be played back in succession.
To stop scanning, press the SCAN button to deactivate the Scan mode.
NOTES
•In case a
Press the F button so that the "FUNC" indicator lights up, then go to step 1.
•Press the F button to return to the normal mode. The "FUNC" indicator light goes out.
Controlling CD Changer (Optional)
If an optional Alpine
NOTE
The CD controls on the
1 Press the SOURCE button to activate the CD Changer. The display shows the disc number and track number.
NOTE
To start play or pause play, press the :/J button.
2 Make sure that the "FUNC" indicator light goes out, then press the Preset buttons to select the desired disc loaded in the CD Changer.
NOTES
•After selecting the desired disc, you can operate in the same way as for the CD player.
For details, please see the CD Operation section.
•If the "FUNC" indicator is illuminated the Disc Select buttons become nonfunctional.
