Ricoh FV-G200B1 manual Connector Specifications, RJ45 Connector

1. Connector Specifications

DC Iris Lens Connector

Power-I/O Connector

1.1RJ45 Connector

RJ45 Connector

This product is NOT a PoE type. Apply power (+10.8 to +26.4Vdc) ONLY through the I/O connector.

Pin Assignment:			LED Information:
	Pin No.	Signal Name			Green LED		Yellow LED		Status
	1	TA+		Green Light ON		Orange Light ON		Power ON
	2	TA-		Green Light ON		Orange Light Blinking		1Gb Transferring
	3	TB+		Light OFF		Orange Light Blinking		100 Mb Transferring
	4	TC+
	5	TC-
	6	TB-
	7	TD+
	8	TD-

The camera is powered-on	Green light: ON	Green light: OFF
	Yellow light: Blinking	Yellow light: Blinking
	1 Gb Transferring	100 Mb Transferring

Please use a 1Gb supported NIC, HUB and LAN cable. Check that the NIC and HUB being used is “1Gb transferring”.

Damaging or mishandling the CAT5e cable may cause the transferring speed to change from 1Gb to 100Mb. If this happens, please replace the CAT5e cable.

FV-G200B1	3/38
User’s Guide Rev. 1.02