38/38 | Ricoh FV-G200B1 specs

Revision History

Rev	Date		Changes	Note
1.00	2012/06/19		Initial Release

1.01	2012/07/06		Updated
			Document title
			Camera Command List (Device Code: 000000)
			10-13H, 3E-3F, 58-5CH,
			Camera Command List (Device Code: 100000)
			20H, 21H, 22H, 23-28H
			Deleted 90H
			Deleted description about white balance
			GenICam command
			Deleted white balance description

1.02	2002/08/25		Updated
			Pin Assignment of Power-I/O Connector
			Added 1/2 and 1/4 Partial Scanning in Camera Output Timing Charts

RICOH COMPANY, LTD.

URL http://www.ricoh.com/fa_security/

	FV-G200B1	38/38
	User’s Guide Rev. 1.02	38/38
	User’s Guide Rev. 1.02

Image 38

Ricoh FV-G200B1 manual 38/38

Contents

GigE Vision VGA Monochrome CCD Camera FV-G200B1 FV-G200B1 User’s Guide Rev Table of Contents Connector Specifications RJ45 Connector DC Iris Lens Connector Power-I/O Connector FV-G200B1 User’s Guide Rev Equivalent Circuit for the Input Pin of the I/O Connector Or equivalent connector Horizontal Timing Vertical Timing Full Scanning 2 1/2 Partial Scanning 3 1/4 Partial Scanning AOI Area of Interest Fval Lval SUB Pixel Transferring Image Timing Normal ModePulse Width Trigger Mode Trigger signal Exposure Timing with the Positive Polarity Trigger SignalInput Trigger signal Trigger signal With Photocoupler delay Edge Preset Trigger Mode 14/38 15/38 16/38 Reset mode Communication Format Communication SettingsCommunication Method Name Descriptions 【Example Code】Reading the data from the command 00H Camera Control Command Camera Command List Device Code 22/38 23/38 24/38 Descriptions of the Camera Control Commands Device code Underline settings are the factory default settings 26/38 27/38 28/38 29/38 30/38 Descriptions of the Camera Commands Device code AGC 32/38 33/38 34/38 GenICam Command / Camera Command Reference Table GenICam command Device Command Function 2EH 37/38 38/38