|
|
|
|
• | 8 GMRS / 14 FRS Channels | • | 2 NiMH Battery Packs |
• | 38 CTCSS Codes | • | Dual Recharging Cradle |
• | Up to 2 Mile Range* |
| with AC Adapter |
• | 5 Selectable Call Tone Alerts | • | Battery Level Meter |
• | Backlit LCD Display | • | Channel Monitor |
• | Battery Recharge Circuit | • | Channel Scan |
• | Optional NiMH Battery Pack | • | Keypad Lock |
| and Charger |
|
|
*Range may vary depending on environmental and/or topographical conditions.
TR622-2 RADIO
1 | Antenna | 11 | Charging LED’s |
2 | PTT | 12 | Battery Level Meter |
3 | Channel/Scan Up Key | 13 | Receive Indicator |
4 | Call Key | 14 | Scan Indicator |
5 | Channel/Scan Down Key | 15 | Channel Indicator |
6 | Select/Power Key | 16 | Call Indicator |
7 | Speaker | 17 | Keypad Lock Indicator |
8 | Monitor Key | 18 | Transmit Indicator |
9 | Volume Up Key | 19 | Volume Setting Indicator |
10 | Volume Down Key | 20 | CTCSS Indicator |
Congratulations on your purchase of the Uniden
Use it at sporting events to stay in contact with family and friends, hiking, skiing, outdoors, or in a neighborhood watch for vital communication. This compact,
OPTIONAL ACCESSORIES
Your package contains two
•NiMH Battery Pack - #BP38
•Recharging Cradle - #RC6248
FCC GMRS LICENSE
The
INSTALL THE BATTERIES
Your
To install the NiMH battery pack:
1)Make sure your radio is OFF.
2)Remove the battery compartment door by pressing the tab at the bottom of the compartment door allowing the door to be removed.
3)Place the NiMH battery pack in the compartment, making sure that the charge contacts are on the lower half of the battery pack and facing out. If the NiMH battery pack is installed incorrectly, the radio will not operate.
4)Replace the battery compartment door.
5)The battery pack must be charged before using for the first time. Place the
charging time to fully charge the battery pack.
Note: Always make sure your battery pack is fully discharged before recharging to prolong the life of the battery pack. The LED will illuminate while the radio is in the charging cradle.
To install 4 AAA alkaline batteries:
1)Make sure your radio is OFF.
2)Remove the battery compartment door by pressing the tab at the bottom of the compartment door allowing the door to be removed.
3)Install 4 AAA alkaline batteries (not included) into the battery compartment. Be certain to follow the + and – symbols in the compartment. Installing the batteries incorrectly will prevent the radio from operating.
4)Replace the battery compartment door.
BATTERY LEVEL AND
LOW BATTERY ALERT
This unit has a battery level meter on the display to indicate the status of the batteries. When the batteries in the radio are low, the battery level
meter icon will flash. Replace the alkaline batteries immediately or if you are using the NiMH battery pack, you must recharge the battery pack in order to continue using the radio.
Warning! To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden accessories specifically designated for this product.
USING THE RADIO
In order to get the most out of your new radio, read this reference guide completely before attempting to operate the unit.
Turning the Radio On and Adjusting the Volume
1)Press and hold the sel/ key to turn the radio ON, and increase the speaker volume by pressing the volume ▲ key. To decrease the volume, press the volume ▼ key.
2)Press and hold the sel/ key again to turn the radio OFF.
Adjusting the Sound (Key Beeps)
Your radio emits a beep each time one of the buttons or keys (except for the PTT button and call key) are pressed. To turn this sound OFF, press and hold call while turning ON the radio. Repeat this step to turn the sound ON.
Navigating through the Menu
To access the advanced features of the
Normal CTCSS Call Tone Key Lock Normal
off, |
1)To enter the Menu, press the sel/ key.
2)Additional presses of the sel/ key will advance you through the Menu until exiting to "Normal" operating mode.
3)Other methods of exiting the Menu function are:
a.Press and hold the sel/ key again.
b.Press PTT, mon, volume ▲/▼, and call.
c.Wait 10 seconds until the unit automatically returns to “Normal” mode.
Choosing a Channel
Your radio has 22 channels and 38 CTCSS codes you can use to talk to others. In order to speak to someone, each of you must be set to the same channel and CTCSS code.
To choose a channel:
With the radio in "Normal" operating mode press the channel/scan ▲ or ▼ key to increase or decrease the channel number displayed.
Choosing a CTCSS Code
Each of the channels
1)Enter the Menu. The CTCSS code on the LCD display will flash.
2)Press the channel/scan ▲ or ▼ key to increase or decrease the code number displayed. You can also select “OFF” at this stage.
3)Exit the Menu to return to “Normal” mode.
Talking on Your Radio
To talk to others using the radio:
1)Press and hold the PTT button and speak in a clear, normal voice about
2)When you are finished speaking, release the PTT button. You can now receive incoming calls. While
receiving, the icon will appear on the display.
Transmitting a Call Tone
Your
To select a Call Tone:
1)Enter the Menu. Advance through the Menu until the call icon is shown on the display.
The current Call Tone number ( - ) will be indicated.
2)Press the channel/scan ▲ or ▼ key to increase or decrease the number to the desired Call Tone. Each tone will be heard through the speaker.
3)Exit the Menu.
To transmit the selected Call Tone, press the call key. The selected tone will automatically be transmitted for a fixed length of time.
Call Tone will be canceled when the PTT button is pressed.
Channel Scan Feature
Your
To turn ON channel Scan:
Press and hold either the channel/scan ▲ or ▼ key until the scan icon is displayed. The channel number on the display will change as the radio rapidly cycles through the channels.
To turn OFF channel Scan:
Press sel/ , call, or PTT.
Key Lock
To Lock the keypad:
1)Enter the Menu. Advance through the Menu until
the icon appears on the display. The current key Lock status (OFF) blinks on the display.
2)To switch the key Lock mode from OFF to ON, press the channel/scan ▲ key.
3)To confirm the setting, press the sel/ key. The radio returns to the "Normal" mode.
Note: If you exit the setting mode before confirming your selection by pressing the sel/ key, the key Lock setting will be set to OFF.
To Unlock the keypad:
1)Press and hold the sel/ key to turn the radio OFF.
2)Press and hold the sel/ key again to turn the radio ON. The keypad is unlocked.
Automatic Power Save Feature
Your
If there is no transmission nor an incoming call within 3 seconds, your radio switches to the Power Save mode. The radio is still able to receive transmissions in this mode.
LCD Backlight
The LCD Backlight will automatically turn ON when any key (except PTT button) is pressed. The LCD display will illuminate for 10 seconds before turning OFF.
Monitor Mode Feature
Your
a key.
To turn ON the Monitor Mode:
1)Press mon for brief listening, the icon will blink.
2)Press and hold mon for 2 seconds for continuous listening. The receiver circuit will stay open, and let in both the noise and weak signals.
To turn OFF Monitor Mode:
Press mon to return to "Normal" mode, and the icon stops blinking.