Troubleshooting, Warranty, Problem Suggestion

UBC61 scanner Qk 3/12/02 11:22 AM Page 12

Troubleshooting

If your UBC61XLT is not performing properly, try the following steps.

Problem	Suggestion
Improper reception	1. Check the antenna connection or move and reposition the antenna.
	2.	Move the scanner
	3.	You may be in a remote area which could require an optional multiband
		antenna. Check with your dealer or local electronics store.
Scan won’t stop	1. Adjust squelch threshold - refer to page 5, setting the squelch.
	2.	Check the antenna connection.
	3.	Check to see if many of the channels are locked-out. If so, the scanner has
		less chance of finding an active channel.
	4.	Review each channel’s frequency to see if it is still stored in memory and is correct.
	5.	It’s possible that none of the programmed frequencies are currently active.

Scan won’t start.

1. Press the SCAN key again.

2.Adjust the SQELCH control.

3.Check to see if all channels are locked out.

Weather Scan won’t work

1. Weather Scan is not functional in New Zealand or Australia.

Warranty

One Year Limited Warranty

Important: Evidence of original purchase is required for warranty service.

Warrantor: Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden New Zealand Limited

ELEMENT OF WARRANTY: Uniden warrants to the original retail owner for the duration

of this warranty, its UBC 61XLT (herein after referred to as the Product), to be free from defects in materials and crafts- manship with only the limitations or exclusions set out below.

WARRANTY DURATION: This warranty to the original retail owner only, shall terminate

and be of no further effect 12 months after the date of original retail sale. This warranty will

be deemed invalid if the product is; (A) Damaged or not maintained as reasonable and necessary, (B) Modified, altered or used as part of any conversion kits, subassemblies, or any configurations not sold by Uniden, (C) Improperly installed,

(D)Repaired by someone other than an authorised Uniden Repair Agent for a defect or malfunction covered by this war- ranty, (E) Used in conjunction with any equipment or parts or as part of a system not manufactured by Uniden, (F) Warranty is only valid in original country of purchase.

PARTS COVERED: This warranty covers for one (1) year, the Base Unit and Handset only. All accessories (AC Adaptor, Belt Clip etc)are covered for 90 days only.

STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while this warranty is in effect, the warrantor at its discretion, will repair the defect or replace the product and return it to you without charge for parts or service. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. THIS GUARANTEE IS IN ADDITION TO AND DOES NOT IN ANY WAY AFFECT YOUR RIGHTS UNDER THE CONSUMER GUARANTEE ACT.

PROCEDURE FOR OBTAINING PERFORMANCE OR WARRANTY: In the event that the product does not conform to this warranty, the Product should be shipped or delivered, freight pre-paid, with evidence of original purchase (eg. a copy of the sales docket), to the warrantor at:

UNIDEN AUSTRALIA PTY LIMITED	UNIDEN NEW ZEALAND LIMITED
SERVICE DIVISION	SERVICE DIVISION
345 Princes Highway,	150 Harris Road,
Rockdale NSW 2216	East Tamaki, Auckland
Ph (02) 9599 3355 Fx (02) 9599 3278	Ph (9) 273 8383 Fx (9) 274 4253
Toll Free 1300 366 895	Toll Free 0800 4 UNIDEN
	4 864 336
www.uniden.com.au	www.uniden.co.nz

Customers in other States should ship or deliver the Product freight pre-paid to their nearest Uniden Authorised Repair Centre (Contact Uniden for the nearest Warranty Agent to you)