22 460.3875 MHZ, 22 460.3625 MHZ | Uniden UBC 61XLT instruction

UBC61 scanner Qk 3/12/02 11:22 AM Page 11

1.Press either or during a search.

You must be in search hold

before restoring all skipped frequencies.

• SCAN	1	2	3
• MANUAL	4	5	6
SRCH SLCT	7	8	9
HOLD	CLEAR	0	E
HOLD	•
	•
		SKIP
LIGHT	WX	L/O	PRI

For example, select CHAIN 2.

These frequencies

were used during “setting a search range” on page 9.

4. Press SRCH

CHAIN 2

460.0000 MHZ

CHAIN 2

460.5000 MHZ

2.Press and hold SKIP for about

two seconds. You will hear two beeps when all the frequencies have been restored.

• SCAN	1	2
• MANUAL	4	5
SRCH SLCT	7	8
HOLD	CLEAR
HOLD	•	0
	•	0
		SKIP
LIGHT	WX	L/O

PRI

• SCAN	1	2	3
• MANUAL	4	5	6
SRCH SLCT	7	8	9

CLEAR

HOLD

• 0 E

SKIP

LIGHT WX L/O PRI

CHAIN 1 2

Storing Search Frequencies

22460.3875 MHZ

You can quickly store any frequency you find during search.

You must select the channel in which you will store the frequency before entering the

CAUTION search mode. Otherwise, you may erase a stored frequency that you want to keep.

5.When the scanner stops at the frequency you want, press either or

• SCAN	1	2	3
• MANUAL	4	5	6
	7	8	9

1.Press • MANUAL

• SCAN	1	2	3
• MANUAL	4	5	6
SRCH SLCT	7	8	9
	CLEAR

HOLD

• 0 E

SKIP

LIGHT WX L/O PRI

After this step you are in search hold

mode.

Press SRCH to resume searching.

SRCH SLCT
HOLD	CLEAR	0	E
HOLD	•
	•
		SKIP
LIGHT WX		L/O	PRI

CHAIN 1 2

22460.3625 MHZ

HOLDSEARCH

2.Select a channel.

a)Enter the channel number.

b)Then press

•MANUAL

again.

• SCAN	1	2
• MANUAL	4	5
SRCH SLCT	7	8
HOLD	CLEAR
HOLD	•	0
	•	0
		SKIP
LIGHT	WX	L/O

36. Press E to

	6	store the
	6	frequency in the
		frequency in the
	9	channel you
	E	selected.
	E
	PRI

• SCAN	1	2	3
• MANUAL	4	5	6
SRCH SLCT	7	8	9
HOLD	CLEAR
HOLD	•	0	E
	•	0	E
		SKIP

CHAIN 1 2

22460.3875 MHZ

LIGHT

L/O

PRI

3.Select one or more of the personal search bands.

• SCAN	1	2	3
• MANUAL	4	5	6
SRCH SLCT	7	8	9
HOLD	CLEAR
HOLD	•	0	E
	•	0	E
		SKIP
LIGHT	WX	L/O	PRI

	After this	22 460.3625 MHZ
	step you are	22 460.3625 MHZ
in manual mode.		HOLD

Repeat steps 2 through 6 for all the search frequencies you want to store.