Simple Setup
Caution
≥The main unit and supplied speakers are to be used only as indicated in this setup. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.
≥Do not attempt to attach these speakers to walls using methods other than those described in this manual.
Caution
≥Do not touch the front netted area of the speakers. Hold by the sides. e.g. Center speaker
DO
DO
NOT
≥[PT465] Do not stand on the base. Be cautious when children are near. e.g. Front speaker
DO
NOT
Speaker installation options
Positioning
∫Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall.
≥The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg per screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.
[PT465] Preparation for front speakers
Cover plate | Tighten securely. |
|
3 Connect the cable§ (➜ 6). § Use the cable from the stand by releasing it from the grooves at
both ends.
1 Drive a screw (not included) into the wall.
At least 30 mm
‰4.0 mm
‰7.0 to 9.4 mm
Wall or pillar | 4 to 6 mm |
2Fit the speaker securely onto the screw(s) with the hole(s).
Center speaker [PT465]
Front and surround | Center speaker [PT460] |
speaker [PT460] |
190 mm
[PT465] Reattaching the speaker cable to the stand
1Remove the eight screws from the stand, and remove the speaker net.
Screw
2 Position the cable.
Press the cable into the groove.
Approx. Cable 15 cm
RQTX0088
8
106 mm |
|
|
| 200 mm |
|
340 mm | Surround speaker | [PT465] |
|
e.g. [PT465] |
|
|
|
|
| Move the speaker | |||
|
|
|
| In this position, |
|
|
|
| |
|
|
|
| the speaker will |
|
|
|
| so that the screw is |
|
|
|
|
|
|
|
| in this position. | |
DO |
|
|
| likely fall if moved |
|
|
|
| |
|
|
| |||||||
NOT | to the left or right. | DO | |||||||
3 Attach the speaker net with the screws.
∫Fitting speaker stands (not included)
[PT465] (Except front speakers and subwoofer)
[PT460] (Except subwoofer)
Ensure the stands meet these conditions before purchasing them. Note the diameter and length of the screws and the distance between screws as shown in the diagram.
≥The stands must be able to support over 10 kg.
≥The stands must be stable even if the speakers are in a high position.
e.g. Center speaker [PT465]
Metal screw holes
For attaching to speaker stands
5 mm, pitch 0.8 mm
Plate thickness plus | 60 mm | |
7 mm to 10 mm | ||
|
Speaker stand
(not included)
