Simple Setup
step1
[PT465] Assembling the front speakers
Preparation
≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥For assembly, use a
≥For optional wall mount, refer to page 8.
Make sure you have all the indicated components before starting assembly, setup, and connection.
2 Front speakers | 2 Stands | 2 Bases | 8 Screws |
(with cover plate) | (with cable) |
|
|
[PT465] Assembling the front speakers
Slide into the groove.
Tighten securely. |
Cover plate |
| |
Remove using a flat | Insert the wire fully. | |
object. | ||
i: White | ||
≥Keep for | ||
j: Blue | ||
use (➜ 8). | ||
| ||
| Push! | |
Position the | 6 Press into the groove. | |
cable between | ||
the ridges. |
| |
| Tighten securely. | |
∫ Preventing the speakers from falling |
|
RQTX0088
≥You will need to obtain the appropriate screw eyes to match the walls or pillars to which they are going to be fastened.
≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers.
String (not included)
Thread from the wall to the speaker and tie tightly.
|
|
| Approx. |
Rear of the speaker | Screw eye | Wall | 150 mm |
|
(not included)
6
