Panasonic SC-PT465 manual AC mains lead connection, Preparing the remote control, Batteries, Use

Other audio connections

TV or external	Cable required	Main unit terminal		Features
equipment terminal	(not included)
	Optical digital audio cable	[\\\\\OPTICAL\IN\\\\\\]		This unit can decode the surround signals received
				through the set top box, digital broadcasting or satellite
				broadcasts. Refer to your equipment’s operating
				instructions for details. Only Dolby Digital and PCM can
	≥Do not bend sharply when			be played with this connection.
OPTICAL OUT				≥After making this connection, make settings to suit the
	connecting.		OPTICAL
			IN	type of audio from your digital equipment (➜ 32).

step4 AC mains lead connection

Simple Setup

[PT465]

Before connecting the AC mains lead

Set the voltage.

	VOLT ADJ			Use a flat-head screwdriver to
				move the voltage selector to the
110 127		V 220	240V appropriate position for the area
				in which this system is used.

[Saudi[Arabia[and[Kuwait]

BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 4 BEFORE CONNECTION.

Main unit

AC IN

AC mains lead (included)

To household mains socket

connection / Preparing the remote control

Conserving power	[Note]
The main unit consumes a small amount of power, even when it is in	The included AC mains lead is for use with the main unit only. Do not use
standby mode (approx. 0.4 W). To save power when the unit is not to be	it with other equipment. Also, do not use cords for other equipment with
used for a long time, unplug it from the household AC mains socket.	the main unit.
You will need to reset some memory items after plugging in the main
unit.

step5 Preparing the remote control

/ AC mains lead

∫Batteries

Insert so the poles (i and j) match those in the remote control.





R6/LR6, AA

Do not:

≥mix old and new batteries.

≥use different types at the same time.

≥take apart or short circuit.

≥attempt to recharge alkaline or manganese batteries.

≥use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can severely damage the remote control.

Remove the batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

∫Use

Cable connections

Aim at the remote control signal sensor (➜ 15), avoiding obstacles, at a maximum range of 7 m directly in front of the unit.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

≥Do not use rechargeable type batteries.

≥Do not heat or expose to flame.

≥Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed.

RQTX0088

11