Adjusting the subwoofer level
You can adjust the amount of bass. The unit automatically selects the most suitable setting according to the type of playback source.
SUBWOOFER | SUB W 1#SUB W 2#SUB W 3 | |
LEVEL | } | |
≥To check the current setting, press [SUBWOOFER LEVEL].
≥The setting you make is retained, and recalled every time you play the same type of source.
Using Subwoofer Boost
Main unit only
You can enhance the subwoofer effect with strong bass.
SW BOOST indicator | BST | ||
|
| SW | The SW BOOST indicator lights when |
|
| BOOST | Subwoofer Boost is turned on. |
|
|
|
|
Adjusting the speaker level
You can adjust the surround sound levels.
Preparation
≥Press [i, ` VOL] to adjust the volume to normal listening level.
≥Select “TEST TONE” from “SPEAKER SETTINGS” in “AUDIO” menu (➜ 24).
1 | Enter test tone mode. |
|
OK | e.g. | AUDIO - SPEAKER SETTINGS - TEST TONE | |
|
| SPEAKERS | TRIM LEVEL |
|
| LEFT | − − |
|
| CENTER | 0dB |
|
| RIGHT | − − |
|
| SURROUND RIGHT | 0dB |
|
| SURROUND LEFT | 0dB |
|
| SET |
|
|
| RETURN | EXIT : SETUP |
Test tone will be output to each channel in the following order.
LEFT, CENTER, RIGHT,
SURROUND RIGHT, SURROUND LEFT
2 |
| Adjust the speaker level for each | effects |
OK | speaker. (CENTER, SURROUND | ||
|
| RIGHT, SURROUND LEFT) | sound |
|
| `6 dB to i6 dB | |
|
|
| |
|
| ≥To exit the screen, press [SETUP]. | Using |
|
|
| |
∫ To adjust speaker level during play | |||
(Effective when playing
1Press and hold [—CH SELECT] to select the speaker.
While the speaker channel is displayed, press
≥You can adjust SW (Subwoofer) only if the disc includes a subwoofer channel and “ÎPLII” is not lit.
2Press [3] (increase) or [4] (decrease) to adjust the speaker level for each speaker.
C, RS, LS, SW: `6 dB to i6 dB
(L, R: Only the balance is adjustable.)
To adjust the balance of the front speakers, while “L” or “R” is selected, press [2, 1].
RQTX0088
31
