Step 2: Connect the Charger
1Connect the AC adaptor to the DC IN 9V jack and to a standard 240V AC wall outlet. Set the charger on a desk or tabletop, and place the handset in the charger with the keypad facing forward.
Make sure the charge LED illuminates. If the LED does not illuminate, check to see that the AC adaptor is plugged in and that the handset makes good contact with the charger
charging contacts.23
• Use only the supplied
• Place the charger close to the AC outlet so that you can unplug the AC adaptor easily.
4Charge the handset for
Step 3: Register the Handset |
| |
YOU NEED TO REGISTER THE DSS7805 TO THE MAIN BASE BEFORE USE! | ||
1 | Be sure the handset battery is |
|
2 | fully charged. |
|
With the main base in standby | DSS7805 | |
|
| |
| mode (i.e., not being used), |
|
| place the extra handset in the |
|
| main base unit to begin | DSS7805 |
| registration. | |
3 | While the handset is registering, | DSS7805 |
| Handset Registering will | |
|
| |
| appear in the LCD. When |
|
| Registration Complete is |
|
| displayed, the handset has been |
|
| registered to the base. If |
|
| Registration Failed appears, |
|
| please try these steps again. | DSS7805 |
(3)