Uniden DECT 2015 Series manual Registering the Handset, To register to a DECT2015 or DECT2035 base

Page 6

Registering the Handset

You must register the handset to the base before you can use it. Only one handset can be registered at a time. (If an accessory handset has ever been registered to a base, you must reset the handset before you can register it to a new base.)

To register to a DECT2015 or DECT2035 base:

Place the accessory handset in the base. While the handset is registering, Handset Registering appears in the LCD. When Registration complete is displayed, the handset has been

registered to the base.

What if the display shows Registration failed?

Pick up the handset from the base and try again.

1

Extra Handset	Charge the handset
	for 15-20 hours.
Charging cradle

2

Extra Handset

Place the extra handset in the main base to register.

Main Base

4

Extra Handset

3 Main+Base

Charging cradle

5

Image 6

Contents Dect Accessory handset for Dect 2015 Series Dect 2035 Series Welcome Terminology Used in this ManualInstalling the Accessory Handset Checking the Package ContentsCompatible Bases Installing the Battery Charging the Accessory Handset Registering the Handset To register to a DECT2015 or DECT2035 baseResetting the Handset Resetting the Handset Without the Base Using the Interface Parts of the HandsetReading the Display During a callUsing the Four-way Function Key Using the Handset MenusEntering Text from Your Handset 111Press 6 once to enter M Using Your Accessory Handset Adjusting the VolumeMaking and Receiving Calls Using Caller ID and Call Waiting Using Call WaitingUsing the Phonebook Redialing a Number Privacy ModeAdjusting the Audio Tone Muting the Ringer One Call OnlyUsing Hold, Conference, Transfer and Intercom Accessing Your Answering System Screening CallsBattery Life Accessing VoicemailMaintenance Low Battery AlertBattery Replacement and Handling Clean the Battery ContactsMemo Memo One Year Limited Warranty Uniden Dect