Uniden DECT 2005 Series, DECT 2015 Series, DECT 2035 Series manual Installing the Battery

Page 4

Installing the Battery

Use only the Uniden BT-904 rechargeable battery pack supplied with your cordless telephone.

Unpack the handset, battery pack and battery cover.(If the battery cover is on the handset, press in on the notch and slide the cover off.)

Push the battery pack connector in firmly. (You should hear it click into place.) Gently tug on the battery wires to make sure the connection is secure.

Place the cover over the battery compartment and slide it up into place.

Line up the red and black wires on the battery pack connector with the sticker in the handset’s battery compartment.

RED

BLACK

3

Image 4

Contents Dect Accessory handset for Dect 2015 Series Dect 2035 Series Welcome Terminology Used in this ManualChecking the Package Contents Installing the Accessory HandsetCompatible Bases Installing the Battery Charging the Accessory Handset Registering the Handset To register to a DECT2015 or DECT2035 baseResetting the Handset Resetting the Handset Without the Base Using the Interface Parts of the HandsetReading the Display During a callUsing the Handset Menus Using the Four-way Function KeyEntering Text from Your Handset 111Press 6 once to enter M Adjusting the Volume Using Your Accessory HandsetMaking and Receiving Calls Using Caller ID and Call Waiting Using Call WaitingUsing the Phonebook Privacy Mode Adjusting the Audio ToneRedialing a Number Muting the Ringer One Call OnlyUsing Hold, Conference, Transfer and Intercom Accessing Your Answering System Screening CallsAccessing Voicemail MaintenanceBattery Life Low Battery AlertBattery Replacement and Handling Clean the Battery ContactsMemo Memo One Year Limited Warranty Uniden Dect