Uniden BC898T manual Edacs

Missing replies to conversations. (continued)

One or more of the	Make sure all the system’s
system’s frequencies	frequencies have been
might not be entered.	entered.
If the scanner is set to	Make sure the EDACS
scan an EDACS system,	channels are programmed
the EDACS channels	in LCN order. Review
might not be in LCN	“Programming EDACS
(logical channel number)	Systems” on Page 44.
order.
The system you are trying	Set the scanner to scan
to scan might be LTR or	LTR or EDACS systems.
EDACS.	Review “Programming
	EDACS Systems” on
	Page 44 and
	“Programming LTR
	Systems” on Page 45.

If you still cannot get satisfactory results while using your scanner or if you want additional information, please call or write the Uniden Parts and Service Division. The address and phone number are listed in the Warranty at the end of this manual. If you would like immediate assistance, please call Customer Service at (800) 297-1023.

If you have Internet access, you can visit http://www.uniden.com for additional information.

49