ADVANCED FUNCTIONS
RESETTING YOUR BASE UNIT
The base unit can be reset to default factory values. RESET ALL will desubscribe all connected handsets and put the base unit into subscription mode. INITIALIZE will reload default parameters which are:
Base unit ringer volume: | level #9 | |
Base unit ringer melody: | melody #4 | |
Dialling mode: | DTMF dialling | |
Flash time: | 600ms New Zealand, 100ms Australia | |
Call barring: | all barred numbers and the assigned | |
| handsets are cleared | |
Reset your base unit as follows: |
|
|
|
| |
•press [menu] key until you reach the BASE SETTING display on the LCD.
•press [OK] key to choose this menu item.
•press [menu] key until BASE RESET is displayed on the LCD.
•press [OK] to choose this option.
•FP PIN: will be displayed.
•enter your 4 digit PIN number and press [OK]. (Factory default is 1590).
•press [menu] key to scroll between
RESET ALL and INITIALIZE options.
•press [OK] when you have chosen your preferred reset option.
•press talk [
].
RESET
RESET ALL
OUTSIDE LINE PAUSE (PABX)
The base can be programmed to insert a 3 second Pause after the first digit. This is for accessing an outside line through a PABX.
• press [menu] key followed by [*] key and PABX SETTING will be displayed on the LCD.
• press [OK] key to choose this menu item.
• PABX SET 1 will be displayed.
• press [OK].
•key in the digit you wish to use to activate the Pause.
•press [OK] key.
16 | • press talk [ | ]. |
|