Icom iF22SR instruction manual Regular charging with the BC-146

Page 12

2 BATTERY PACKS

DRegular charging with the BC-146 (continued)

First insert the spacer in to the BC-146, then insert the battery or the transceiver.

Be sure to check orientation and the spacer combination.

Avoid overcharging–Batteries must be removed from the charger to stop charging. Batteries should not be charged for more than 24 hours.

Turn power OFF

BP-209, BP-210 or BP-222 only

AC adaptor

Check

orientation*

 

Charging indicator

*Viewable stamps of the spacer may differ according to the spacer combination. See p. 6 for details.

7

Image 12
Contents IF22SR Foreword Supplied Accessories Page Table of Contents ‘ Switches, controls, keys and connectors Panel DescriptionVOLUME/POWER Control VOL/POWER PTT Switch PTTTX/RX Indicator LED LED Channel Selector CH‘ LED indicator Brink patternsBattery Packs ‘ Battery pack replacementBattery Packs ‘ Battery cautions ‘ Battery charging Regular charging with the BC-146Regular charging with the BC-146 Rapid charging with the BC-121+AD-94 #11 Rapid charging with BC-144+AD-99Battery pack life ‘ Charging Note‘ Battery case Option Basic Operation ‘ Receiving and transmittingFrequency channel/CTCSS tone list default Channel RX/TX Freq. MHz*1 CH spacing Tone Hz*2‘ Setting squelch level ‘ Auto Scan function‘ Setting the group code number Using the Ctcss Tone CodeExample Freq Push PTTCtcss Find Turn the squelch function ON/OFFUsing the Dtcs Code Example Ring Function Smart-Ring operation see rightSelect the Call-Ring melody Smart-Ring operation Call your group member with Call-Ring melodyOther Functions Audible condition‘ Power save function Key Push Push and hold Mic UP Mic DownMic a Mic BSpecifications GeneralOptions ‘ OptionsCharger Other Options HM-46L/HM-75A/HM-131L Speaker Microphone What is squelch? GlossaryWhat is Ctcss Continuous Tone Coded Squelch Sys- tem ? About CE IcomEurope0168GmbH Count on us