Icom iF22SR Ring Function, Smart-Ring operation see right, Select the Call-Ring melody

Page 24

4 RING FUNCTION

Smart-Ring

The ring function has an answer back feature. This allows you to confirm whether or not a call has reached the member of your group even if the operator is temporarily away from the transceiver.

DSmart-Ring operation (see right)

qSet the same operating channel and CTCSS tone* code for all of

your group transceivers.

wPush [S-Ring/C-Ring] to send the Smart-Ring call.

When a member of your group station answers your call, then the transceiver emits beep tones for every 30 sec. and TX/RX indicator blinks with an orange color.

Push [MONI] to cancel the Ringer beep and indication.

When no answer comes back, the transceiver emits short fail- ure beep tones.

ePush [PTT] to answer the call and to stop the beeps and blink- ing.

*NOTE: This function is available only when the called station has use the same CTCSS tone code and the same operating channels as you.

Call-Ring

Sends the pre-selected ring tone to your group members.

DSelect the Call-Ring melody

qWhile pushing and holding [PTT] and [S-Ring/C-Ring], rotate

[VOL] to turn the power ON.

A sample melody is emitted.

wRotate [CH] to select the ringer melody.

Push [S-Ring/C-Ring] to monitor the selected melody once

more.

eTurn the power OFF to determine the melody.

19

Image 24
Contents IF22SR Foreword Supplied Accessories Page Table of Contents ‘ Switches, controls, keys and connectors Panel DescriptionVOLUME/POWER Control VOL/POWER PTT Switch PTTTX/RX Indicator LED LED Channel Selector CH‘ LED indicator Brink patternsBattery Packs ‘ Battery pack replacementBattery Packs ‘ Battery cautions ‘ Battery charging Regular charging with the BC-146Regular charging with the BC-146 Rapid charging with the BC-121+AD-94 #11 Rapid charging with BC-144+AD-99Battery pack life ‘ Charging Note‘ Battery case Option Basic Operation ‘ Receiving and transmittingFrequency channel/CTCSS tone list default Channel RX/TX Freq. MHz*1 CH spacing Tone Hz*2‘ Setting squelch level ‘ Auto Scan function‘ Setting the group code number Using the Ctcss Tone CodeExample Freq Push PTTCtcss Find Turn the squelch function ON/OFFUsing the Dtcs Code Example Ring Function Smart-Ring operation see rightSelect the Call-Ring melody Smart-Ring operation Call your group member with Call-Ring melodyOther Functions Audible condition‘ Power save function Key Push Push and hold Mic UP Mic DownMic a Mic BSpecifications GeneralOptions ‘ OptionsCharger Other Options HM-46L/HM-75A/HM-131L Speaker Microphone What is squelch? GlossaryWhat is Ctcss Continuous Tone Coded Squelch Sys- tem ? About CE IcomEurope0168GmbH Count on us