Icom iF22SR instruction manual ‘ Battery case Option

Page 15

BATTERY PACKS 2

Battery case (Option)

When using a BP-208 OPTIONAL BATTERY CASE attached to the transceiver, install 6 AA (R6) size alkaline batteries as illustrated below.

DCAUTIONS

Use ALKALINE batteries only.

Make sure all battery cells are the same brand, type and ca- pacity.

Never mix old and new batteries.

Either of the above may cause a fire hazard or damage the transceiver, if ignored.

Never incinerate used battery cells since internal battery gas may cause them to rupture.

Never expose a detached battery case to water.

If the battery case gets wet, be sure to wipe it dry before using it.

10

Image 15
Contents IF22SR Foreword Supplied Accessories Page Table of Contents Panel Description ‘ Switches, controls, keys and connectorsChannel Selector CH VOLUME/POWER Control VOL/POWERPTT Switch PTT TX/RX Indicator LED LEDBrink patterns ‘ LED indicatorBattery Packs ‘ Battery pack replacementBattery Packs ‘ Battery cautions Regular charging with the BC-146 ‘ Battery chargingRegular charging with the BC-146 Rapid charging with BC-144+AD-99 Rapid charging with the BC-121+AD-94 #11‘ Charging Note Battery pack life‘ Battery case Option ‘ Receiving and transmitting Basic OperationChannel RX/TX Freq. MHz*1 CH spacing Tone Hz*2 Frequency channel/CTCSS tone list default‘ Auto Scan function ‘ Setting squelch level‘ Setting the group code number Using the Ctcss Tone CodeExample Push PTT FreqTurn the squelch function ON/OFF Ctcss FindUsing the Dtcs Code Example Ring Function Smart-Ring operation see rightSelect the Call-Ring melody Call your group member with Call-Ring melody Smart-Ring operationAudible condition Other Functions‘ Power save function Mic B Key Push Push and hold Mic UPMic Down Mic aGeneral SpecificationsOptions ‘ OptionsCharger Other Options HM-46L/HM-75A/HM-131L Speaker Microphone Glossary What is squelch?What is Ctcss Continuous Tone Coded Squelch Sys- tem ? About CE IcomEurope0168GmbH Count on us