Icom IC-F610 instruction manual Mounting the transceiver, Inverting the Front panel

Page 30

8 CONNECTION AND MAINTENANCE

Mounting the transceiver

The front panel can be inverted for correct viewing while leav- ing the built-in speaker facing away from the mounting sur- face.

DInverting the Front panel

qUnscrew the 2-side screws.

wDetach the Front panel forward from the transceiver.

eBend the flat cable between Front panel and main unit as shown in the following diagram.

Flat cable orientation

to MAIN unit

normal bend line

inverted

bend line

to Front panel

rInvert the transceiver 180 degrees clockwise as below. tRe-attach the Front panel to the transceiver.

yTighten the 2 screws.

CAUTION:

NEVER rotate the transceiver more than 180 degrees.

DO NOT bend the flat cable too hard. The cable may dam- aged.

NOTE: Be sure to bend the flat cable in the correct direction, before turning over (inverting) the transceiver.

25

Image 30
Contents IF610 Page If disregarded, inconvenience only. No risk May occurEquipment damage may occur Personal injury, fire or electric shockPage Table of Contents Front panel AF Volume Control KnobPanel Description Function DisplayClear KEY* Clear/P4 Mode KEY* Mode/P2Memory Down Right Down KEY Call Back KEY* Call Back/P3‘ Programmable key assignment Function display Turning power on OperationOpening text ‘ General‘ Calling Making a call with a memory Dial NumberMaking a call with a Memory Individual Code Calling the DispatcherMaking a Status Call Sending a status message to the DespatcherPTT Quick Call function Making a call via the keypadInclude Call Individual CallEnhanced Group Call Group CallStatus Call Priority CallSystem Wide Call Cancellation of DivertEmergency Call Pstn Call‘ Special calling via the keypad Reception of an individual call Receiving‘ Receiving a call Reception of a Group CallReception of a Status Call Reception of a SDM Short Data Message Call‘ Progress messages Other Function Call Back functionDtmf function Mic Hook OFF function Scrambler functionCompander function Mic Hook on functionIgnition SW function Auto Talk Around functionUser Setup Menu ‘ User Setup MenuSelectable items and setting value OPC-822 Option installation ‘ MAP27 serial interfaceMonitor Conventional Mode‘ Conventional Mode operation CH Up/CH DownConventional Mode Connection and Maintenance Rear panel and connectionDC Power Receptacle Supplied AccessoriesAntenna Connector Microphone HangerMounting the transceiver Inverting the Front panelOptional UT-109 /UT-110 Installation Mounting the transceiverCleaning Optional OPC-617 installationFuse replacement AntennaCloning ‘ CloningPC-to-transceiver cloning Options HM-100TNSM-25 0168 Intended Country of Use

IC-F610 specifications

The Icom IC-F610 is a hybrid two-way radio designed to meet the demands of both commercial and industrial applications. Combining a robust build with advanced communication technologies, this radio is tailored for users who value reliability and clarity in their communications.

One of the standout features of the IC-F610 is its dual-mode capability, allowing it to operate effectively in both analog and digital modes. This versatility ensures that users can seamlessly transition between different communication systems depending on their needs or the infrastructure in place. The radio supports the D-STAR digital protocol, enhancing voice clarity and enabling text messaging capabilities, which is essential for efficient communication in noisy environments.

The IC-F610 is designed with user ergonomics in mind. Its interface is intuitive, with a large LCD display that provides clear visibility of function status even in bright daylight. The keypad is well-organized, enabling quick access to essential functions, which is particularly beneficial during emergency situations. Additionally, the radio has programmable buttons that users can customize, leading to a more tailored and user-friendly experience.

Durability is a critical characteristic of the IC-F610. It is built to withstand harsh conditions, featuring an IP67 rating for water and dust resistance. This means the radio can be submerged in water up to 1 meter deep for 30 minutes without damage, making it an excellent choice for outdoor use or in challenging work environments. Its rugged design further ensures that it can survive drops and bumps, maintaining functionality over time.

Another significant feature is the built-in GPS functionality, which allows users to share their location with others in their communication network. This is particularly useful for coordination in fields such as construction, security, and emergency response, where knowing the location of team members can enhance operational efficiency and safety.

Moreover, the IC-F610 boasts exceptional battery life, ensuring that users can rely on this device throughout long shifts without the constant worry of recharging. The radio uses a high-capacity lithium-ion battery, which is lightweight yet powerful, providing extended usage time.

In conclusion, the Icom IC-F610 stands out as a versatile and robust two-way radio, rich in features that enhance communication efficiency. Its dual-mode operation, user-friendly design, ruggedness, GPS capability, and long battery life position it as a top choice for professionals across various industries seeking reliable and advanced communication tools.