Icom IC-F610 instruction manual ‘ Programmable key assignment

1 PANEL DESCRIPTION

‘Programmable key assignment

Dealer programmable keys [P0], [P1], [P2], [P3], left Up/Down [∫]/[√] and right Up/Down []/[] can be programmed for one of several functions by your Icom dealer.

In the following explanations, programmable function names are bracketed; the specific switch used to activate the func- tion depends on programming.

Trunking mode only:

[Despatcher]([P0])*

The exclusive key used to call the despatcher.

[Call1], [Call2]

The exclusive key used to call the pre-programmed sta- tion.

[Emergency]([P1])*

The exclusive key used to call the pre-programmed Emergency station.

[Clear]([P4])*

Push this key to clear down the communication.

Push and hold the key for 2.5 seconds when your trans- ceiver is in the standby mode (not during communication, dialling or operation), the User Setup Menu (p. 19) appears.

[Call Back]

Push this key to turn the Call Back function ON or OFF. Press the key will display the stored calls that you have not yet answered.[Status Up] [Status Down]([∫]/[√])* This key is used to select the status memory.

[Memory Up] [memory Down]([]/[])*

This key is used to select the Memory channel.

*Default key assignments.

Either Trunking or Conventional mode;

[Mode]

Push the key to toggles between Trunking mode and Conventional mode.

[Null]

No function is assigned.

[High/Low]

Pushing the key will toggle in the order of Low1 power, Low2 power, High power and Auto power.

[Public Address]

Use the transceiver as an audio amplifier.

[RX Speaker]

Output the receive audio to an out-of-vehicle speaker.

3