Testing the Radio Range | Gardena 1243 instruction

4.Repeat steps 2 and 3 until all receivers are registered.

5.Press the Menu – key. The main level is displayed.

6.Test the radio range (refer to section 7.4 Testing the Radio Range).

7.4 Testing the Radio Range

1.Install the radio receivers/radio switches as required (do not bury the valve boxes yet).

2.Test the Central Radio Control Unit in that room in which you plan to install the bracket for the control unit.

3.Open and close the channels manually to check they work correctly (refer to 8.1 Opening and Closing Channels Manually).

4.Once you have established radio contact, bury the valve boxes and permanently install the holder for the Central Radio Control Unit.

1.2.

7.5 Setting the Control Programme

Prerequisite: You must have set the current time and current day. The receivers must not be registered. All programmes are saved when receivers are cancelled.

Selecting the Programme Memory Location (PROG) :

The Control Unit can store 32 programmes.

1. If the main level is displayed, press the Menu + key twice.

Programme Memory Location 1 flashes.

2. Select the programme memory location using the ▲-▼keys

3.4.(for example, memory location 1 8 ) and confirm by pressing the OK key.

START-TIMEand the hours flash on the display.

Setting the Programme Start Time (START- TIME) :

3. Set the hours for the programme start time using the

▲-▼keys (e.g. 1 6 hours) and confirm by pressing the OK key.

START- TIME and the minutes flash on the display.

4. Set the minutes for the programme start time using the ▲-▼keys (e.g. 20 minutes) and confirm by pressing the OK key.

RUN-TIMEand the hours flash on the display.

5.6.

Setting the Programme Run Time (RUN-TIME) :

5. Set the hours for the programme run time using the ▲-▼keys (e.g. 2 hours) and confirm by pressing the OK key.

RUN-TIMEand the minutes flash on the display.

6. Set the minutes for the programme start time using the ▲-▼keys (e.g. 45 minutes) and confirm by pressing the OK key.

CHANNEL and the arrow L flash in the top left-hand corner of the display next to 3rd.

Setting the watering days:

(a)every 2nd or 3rd day (from current day)

(b)select any day (daily watering possible)

7. (a)	7. (a) Every 2nd or 3rd day:
	Set the arrow L to 2nd or 3rd using the ▲-▼keys (e.g. 2nd L
	= every 2nd day) and confirm by pressing the OK key.
	The watering days (e.g. 2nd ■ ) and preview for the week
	(e.g. Sa ■ , Mo ■ , We ■ , Fr ■ ) are displayed.

		The days in the preview for the week depend on the current
		day of the week (e.g. Sa).
	– or –
7. (b)	(b) Any day of the week:
	Set the arrow L to the correct day (e.g.Mo L) using the
	▲-▼keys and activate (e.g. Mo ■ L) or deactivate the day
	using the OK key.
	Once you have activated all the days you require (e.g. Mo ■,
	Tu ■, We ■ ), press the ▼ key repeatedly until the arrow L
	next to Su disappears and appears in front of channel V 1.
	The preview for the week (e.g. Mo ■, Tu ■, We ■ ) for the water-
	ing days is displayed.
	Assigning the Programme to the Channels:

	The programme only controls only the assigned channels.
8.	8. Set the arrow V to the channel you require using the ▲-▼keys
	(e.g. V 3 = channel 3) and activate (e.g. V■ 3) or deactivate

the channel by pressing the OK key.

Once you have activated all the channels you require (e.g. ■ 3 and ■ 8), Press the Menu + key.

The display then changes to point 2 and the current programme data are displayed.

The receivers must be registered and the levers of the Irrigation Valves must be set to the “AUTO” position in order to run the set programmes.