Kenwood TH-D7A, TH-D7E instruction manual To quit MHz Scan, press ESC

■Locking Out a Memory Channel

1Select memory channels that you prefer not to monitor while scanning.

MHz SCAN

MHz Scan monitors a 1 MHz segment of the band, using the current frequency step size. The current 1 MHz digit

2

3

1 Recall the desired memory channel.

determines the limits of the scan. For example, if the current frequency is 145.400 MHz, then the scan range

42 Press [F], [0] to switch Lockout ON (or OFF).

•A star appears above the channel number when the

5channel is locked out.

6

7	STA CON PACKET96 BCONDUP
	7	9
5

8

9

10

11Note:

◆The L0 to L9 and U0 to U9 memory channels cannot be locked

12out.

13◆ If you have recalled a memory channel on the non-current band (A or B), you cannot select the same channel on the current band

14to lock out.

15

16

17

18

19

20

21

22

23

would be from 145.000 MHz to 145.995 MHz. The exact upper limit depends on the current frequency step size.

1Select the desired band.

2Press [VFO] to select VFO mode.

3Select a frequency within the desired 1 MHz segment.

4Press [MHz] (1 s) to start MHz Scan.

•Scan starts at the frequency currently displayed.

•The 1 MHz decimal blinks while scanning is in progress.

•To reverse scan direction, press [UP] (upward scan) or [DWN] (downward scan).

5To quit MHz Scan, press [ESC].

36