Kenwood TH-D7A, TH-D7E instruction manual Microphone Control, Ctcss ON/ OFF

MICROPHONE CONTROL

1The optional SMC-33 or SMC-34 speaker microphone

2has 3 Programmable Function (PF) keys on its top. You

3can assign these keys the transceiver key functions that you frequently use. First connect the optional speaker

4microphone to this transceiver.

The key functions you can assign are shown below:

5

6

The defaults on the PF keys are as follows:

Mic [1]: [A/B]

LANP
MONI
Press [F] first.	Press [ENT] first.

7Mic [2]: VFO/ Memory Recall mode switch

8Mic [3]: [CALL]

91 Press Mic [1], [2], or [3]+ POWER ON depending on

LANP

10

11

12

13

14

which key you want to reprogram.

• “PF 1”, “PF 2”, or “PF 3” appears.

SQL	TH-D7A only
Press [F] first.
[0]	Memory Channel	[5]	Offset freq. select
	Lockout ON/ OFF
[1]	Tone ON/ OFF	[6]	AM/ FM switch 1

152 Press a key on the transceiver depending on the

16function you want to assign.

17• Pressing a single key on the keypad assigns only the

18function printed on the top of the key.

19• To assign the second function (printed in purple), press

[F]first (ex. [F], [VFO]).

20• Pressing the PTT switch assigns the function that

21switches between VFO and Memory Recall mode.

22• Press [F], [0] to [9] to assign the functions that are

[2]	Tone freq. select	[7]	Programmable VFO
			range select
[3]	CTCSS ON/ OFF	[8]	Freq. step size
			select
[4]	CTCSS freq. select	[9]	Memory name store

1TH-D7A only

Note:

◆ Turn OFF the transceiver power before connecting the optional

23

selectable in Function Select mode.

speaker microphone.

•Pressing [ENT], [0] to [9] allows you to recall memory channel 0 to 9.

◆ If the LOCK on the speaker microphone is ON, you cannot

reprogram the Programmable Function keys.

44