Kenwood TH-D7A, TH-D7E Automatic Dialer, Press UP/ DWN to select a character, Press OK

AUTOMATIC DIALER

1If you use the 10 dedicated memory channels to store DTMF numbers, you need not remember a long string of

2digits.

3

4■ Storing a DTMF Number in Memory

5Note: Audible DTMF tones from other transceivers near you (or from

your own speaker) may be picked up by your microphone. If so, you

6may fail to correctly program a DTMF number.

71 Press [MENU] to enter Menu mode.

82 Press [1], [3], [1] to select “1–3–1 (STORE)”.

9

3 Press [UP]/ [DWN] to select from channel 0 to 9.

7Repeat steps 5 and 6 to enter up to 8 digits.

•Pressing [OK] after selecting the 8th digit causes the cursor to move to the start of the next field.

•	To complete programming the name after entering
	less than 8 digits, press [OK] twice.
•	Each press of [ESC] causes the cursor to move
	backward.

10

11

4 Press [OK].

• Pressing [A/B] deletes the digit at which the cursor

is blinking.

12	•	The display for entering a memory name appears;
		the first digit blinks.
13	•	To skip naming the channel, press [OK] again. You
14		can jump to step 8.

15

16

17

18

19

5 Press [UP]/ [DWN] to select a character.

20

21		• You can enter alphanumeric characters plus special
		ASCII characters.
22	6	Press [OK].
23
		• The cursor moves to the next digit.

8Press the keys in sequence on the keypad to enter a DTMF number with up to 16 digits.

•You may press [UP]/ [DWN] then [OK] to select each digit. Select a space if you want to put a pause.

9Press [OK] to complete the programming.

10Press [MENU] to exit Menu mode.

You can confirm the stored DTMF number by using steps 1 to 3.

You can also use the keypad to enter alphanumeric characters in step 5. For example, each press of [TNC] switches entry as A, B, C, a, b, c, then 2. Press [ENT] to switch among the special ASCII characters.

42