Chapter 9 Service/Subscriber Provisioning
Defining Policies For Service Provisioning
Step 2 Select Create Profile. A Prompt window appears (see Figure 9-35).
Figure 9-35 Prompt Window
Step 3 Enter a name for the profile in the Enter profile name data entry box. IP Uplink Bronze was entered in the example shown in Figure
Note Each service profile must have a unique name. Do not insert spaces into a service profile name.
The new profile name appears in the IP Uplink Service Profiles list on the left side of the window (see Figure
Figure 9-36 IP Uplink Service Profile Configuration Window (Configuration Tab)
Step 4 Configure the parameters displayed in the Configuration tab (shown in Figure
Cisco 6400 Service Connection Manager User Guide
| ||
|