Cisco Systems OL-0569-01 manual Cisco

Chapter 9 Service/Subscriber Provisioning

Subscriber Provisioning

Table 9-2displays the Cisco 6400 SCM service types and the tabs in the Service/Subscriber Connection window that should be configured for each service type.

Table 9-2 Connecting a Subscriber to a Service Instance

Cisco 6400		Connect To Single Domain	Connect to
Service Type	Connection Details Tab	Tab	Multi-Domain Tab
Pure ATM	Configure the parameters	Configure the parameters	Not required
Switching	displayed in the Connection	displayed, as required for all
Service	Parameters and Internal	service types. Click Connect
	NSP, NRP PVC panels for	when required.
PPPoA Single			Not required
	all service types, as
Domain
	required.
L2TP			Not required
RFC1483			Not required
Routing
RFC1483			Not required
Bridging
RFC1483 IRB			Not required
IP Uplink			Configure the
			parameters displayed,
			as required. Click
			Connect when
			required.

To connect a subscriber to a service instance, follow these steps:

Step 1 Select the Cisco 6400 UAC, Subscriber, Connect option from an NSP card.

The Service/Subscriber Connection window (shown in Figure 9-91)appears. See the “Service/Subscriber Connection Window” section on page 10-60for further details on the parameters displayed.

Cisco 6400 Service Connection Manager User Guide

OL-0569-01 9-73