Cisco Systems OL-0569-01 manual Subscriber Provisioning, Creating a Subscriber

Chapter 9 Service/Subscriber Provisioning

Subscriber Provisioning

Subscriber Provisioning

Figure 9-85displays a typical work flow that describes how to create, configure and connect subscribers (that is, provision end customers).

Figure 9-85 Subscriber Provisioning Work Flow

Create Subscriber

Create a subscriber to connect to a service instance (created earlier)

Configure subscribers information (for example, connection information or name and address details)

Connect subscribers to one or more service instances

Configure an

Existing Subscriber

Connect a

Subscriber to a Service Instance

	Delete a subscriber object
Delete a Subscriber	when they are no longer
	required (for example, when a
	subscriber cancels their service
	agreement)
	Disconnect a subscriber
Disconnect a
	(for example, when a
Subscriber from a
	subscriber changes from
Service Instance
	one category of service to	41811
	another)

The first step is to create (deploy) one or more subscriber objects. Each subscriber object can then be configured with their own particular details (for example, connection or contact details).

Each subscriber can then be connected to one or more service instances. Service instances were created earlier. See the “Creating a Service Instance” section on page 9-36for further details.

Creating a Subscriber

Subscriber objects hold information related to the end subscriber. Subscribers are created by deploying them onto a selected Line Card.

To create subscribers, follow these steps:

Cisco 6400 Service Connection Manager User Guide

OL-0569-01 9-67