Cobra Digital CXR920 VibrAlert and Call Alert, Audible call tone, by vibrating silently or both

Page 14

Operation

Mode Functions

Introduction

Operation

Customer Assistance Warranty

During memory location scan (while receiving an Incoming transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on that memory

VibrAlert® and Call Alert

•

 

Your microTALK® radio can alert you to incoming signals by sounding an

audible call tone, by vibrating silently or both.

 

location.

b. Your radio will remain on that memory location and return to Standby mode. Press the Channel Up or Channel Down button to resume scanning memory locations.

c. After 10 seconds of inactivity, unit starts scan again.

If you press the Talk button while scanning, but more than

10 seconds after receiving a transmission, you will transmit on the memory location on which, during scanning, you last received a transmission.

If you do not press any button within 10 seconds, your radio will automatically resume scanning memory locations.

During memory location scan (while not receiving a transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on the channel/ privacy code that was displayed before you entered mode functions or memory location on which, during scanning, you last received a transmission.

b. Press the Mode button to proceed to other functions.

c. Press the Lock/Enter button to return to Standby mode

on the channel/privacy code that was displayed before you entered mode functions or the memory location on which, during scanning, you last received a transmission.

To reduce the number of memory locations being scanned, you may de-program any unwanted locations. (See page 16 to de-program a memory location.)

Mode Button

Channel Buttons

To change call settings:

VibrAlert® + Ring

1. Press the Mode button

 

until the Call Setting icon

 

flashes on the display.

 

The current setting (“01”

 

vibrate + ring, “02” vibrate

VibrAlert® Only

only or “03” ring only)

 

is displayed.

 

2. Press the Channel Up or

 

Channel Down button to

Ring Only

change the call setting.

 

3. Choose one of the following:

 

a. Press the Mode button

 

to enter the new setting

 

and proceed to other functions.

b. Press the Lock/Enter button to enter the new setting and return to Standby mode.

22

23

Page 13 Page 15
Image 14
Page 13 Page 15
Contents For Assistance in the U.S.A Making Life Easier and SaferRadio while on the go For Assistance Outside the U.S.AFeatures Product FeaturesWarranty and Trademark Acknowledgement Limited One-Year Warranty on Radios & ChargerEstimated operation time on full charge 12 hours Avoid exposure to extreme temperaturesCaring for Your microTALK Radio Auto Battery Save Using Your RadioBattery Low Your microTALK radio is now in StandbyChannels With the radio on, select any Time-out TimerSelectable HighMediumLow Power Output Or Channel Down buttonAuto Squelch/Maximum Range Lock FeatureSignal Strength Meter Buttons to prevent accidental operationPrivacy Codes Mode FunctionsScrolling through Mode Functions Set Ctcss Privacy CodesMicroTALK Range Set DCS Privacy CodesNOAA* All Hazards Radio Channels Voice Activated Transmit VOX Memory LocationsTo recall a stored memory channel location Press the Mode button toBefore you entered mode functions While recalling a stored memory locationChannel Scan To de-program a memory location Press the Mode button untilPress the Mode button to Enter the channel/privacy code Memory icon and the memory location flash on the displayPrivacy Code Scan Will automatically return to Standby mode onPress the Channel Up or Channel Down button to Or DCS can be scanned at a time To scan privacy codesProgrammed Memory Locations Memory Location ScanYour microTALK radio can automatically scan up to Location scan is on. Your radio will continueVibrAlert and Call Alert Audible call tone, by vibrating silently or bothRoger Beep Confirmation Tone Call Tone SettingsUnique call alert Normal Position General Specifications FCC LicenseSafety Information for microTALK Radios For Products Purchased in the U.S.A Product ServiceProduct Service Questions Send the entire product
Top Page Image Contents