Cobra Digital CXR920 owner manual Voice Activated Transmit VOX, Memory Locations

	Mode Functions
Operation
Voice Activated Transmit (VOX)		•
In VOX mode, your microTALK® radio can be used “hands-free,”
automatically transmitting when you speak. You can set the VOX
sensitivity level to fit the volume of your voice and avoid transmissions
triggered by background noise.

Introduction Operation Customer Assistance Warranty

10 Memory Locations	•
Your microTALK® radio has 10 Memory Locations for storing
your most frequently used channels and channel/privacy code
combinations. These Memory Locations can be selected individually or
can be scanned. (See page 21 for memory location scan.)

Mode Button

VOX Icon

To turn VOX mode on or off:

1.Press the Mode button until the VOX icon flashes on the display. The current on or

off setting is displayed.

2.Press the Channel Up or Channel Down button to turn VOX on or off.

Mode Button

Memory Icon

To program a memory location:

1.	Press the Mode button until the
	Memory icon and the memory location
	flash on the display.
2.	Press the Channel Up or Channel Down button
	to select the memory location

	3. Choose one of the following:
	a. Press the Mode button to enter the selected
	on or off setting and proceed
Channel Buttons	to other functions.
	b. Press the Lock/Enter button to enter
	the selected on or off setting and return
	to Standby mode.

To set VOX sensitivity:

Mode Button	1. Press the Mode button until the VOX icon flashes
	and the current sensitivity level
	is displayed.
	The current sensitivity level is displayed
VOX Sensitivity Level	with letters “LE” and a Number 01 through
	05, with Number 05 being the most
	sensitive level and Number 01
	being the least sensitive level.
Channel Buttons	2. Press the Channel Up or Channel Down button
	to change the setting.
	3. Choose one of the following:
	a. Press the Mode button to enter
	the selected setting and proceed to
	other functions.
	b. Press the Lock/Enter button to
	enter the selected setting and return
	to Standby mode.

Channel Buttons

Lock/Enter Button

(0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3.Press the Lock/Enter button to enter

a new memory location or edit an already programmed memory location. The channel numbers will flash on the display.

4.Press the Channel Up or Channel Down button to select a channel (1 through 22).

5.Press the Lock/Enter button. The CTCSS icon and privacy code numbers will flash on the display.

12 13