Cobra Electronics CXR900C Using Your Radio, For charging microTALK radios in desktop charger

Page 4
1. Press and hold the Talk button.
2. With the microphone about 2 inches (5 cm) from your mouth, speak in a normal voice.
3. Release the Talk button when you are finished talking and listen for a response.
You cannot receive incoming calls while pressing the Talk button.
Both radios must be tuned to the same channel/privacy code to communicate.
Nothing Comes Close to a Cobra®
Communicating with Another Person
•
•
Press and hold the Power button until you hear a series of audible tones indicating the radio is on.
Your microTALK® radio is now in Standby mode, ready to receive transmissions. The radio is always in Standby mode, except when the Talk, Call, Mode or Power buttons are pressed.
Turning on Your microTALK® Radio
•

Introduction

Insert Radio(s)

Using Your Radio

For charging microTALK® radio(s) in desktop charger:

1.Insert radio(s) into desktop charger as shown.

2.Insert round connector of 120-volt adapter into jack on back of charger.

3.Plug 120-volt adapter into electrical outlet.

Introduction

Operation

Customer Assistance Warranty

On/Off Power

If charging light is not on, check position of radio. Radio should be upright. The charge

indicator light will stay on as long as the radio is in the charging well and the battery pack is charging. After the battery pack is fully charged, the charge indicator light will turn off.

It normally takes about 15 hours to fully recharge battery pack. Battery pack will not be damaged if it stays in the charging well longer than that.

To charge a single radio, you can bypass the desktop charger and simply insert the wall adapter’s round connector directly into the speaker/microphone/charge jack located on the top of the radio.

Use only the supplied rechargeable batteries and charger for recharging your Cobra microTALK® radio.

Cobra recommends your radio is turned off while being charged.

Quick Start

1. Press and hold the Power button to turn on your radio.

2.Press the Channel Up or Channel Down button to select a channel.

Both radios must be tuned to the same channel/privacy code to communicate.

3.Press and hold the Talk button while speaking into the microphone.

4.When finished talking, release the Talk button and listen for a response.

2English

Battery Low

 

Battery Low

•

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When battery power is low, the Battery Low icon

 

 

 

 

 

 

 

 

 

 

will blink. Your batteries should be recharged.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Auto Battery Save

 

 

 

 

 

 

 

 

 

 

 

 

Battery Save Mode

 

Your microTALK® radio has a unique circuit

 

 

 

 

 

 

 

 

 

 

 

designed to extend battery life. If there are

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

no transmissions for 10 seconds, the radio will

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

automatically switch to Battery Save mode and

 

 

 

 

 

 

 

 

 

 

 

the Power Saver icon will flash in the display.

 

 

 

 

 

 

 

 

 

 

 

This will not affect the radio’s ability to receive

 

 

 

 

 

 

 

 

 

 

 

incoming transmissions.

 

Talk Button

Two Inches (5 cm) from Mouth

3

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Making Life Easier and Safer For Assistance in Canada or the U.S.AAutomated Help Desk Customer Assistance OperatorsProduct Features FeaturesAvoid exposure to extreme temperatures Replace battery compartment cover and belt clipCaring for Your microTALK Radio Estimated operation time on full charge 12 hoursUsing Your Radio Battery LowAuto Battery Save For charging microTALK radios in desktop chargerTime-out Timer ChannelsListening for a Response Call ButtonTo turn the lock feature on or off Light/Max Range To briefly turn off auto squelchTo turn maximum range extender on To attach a speaker/microphoneUsing your Radio and Mode Functions To play back an incoming transmissionTo record an outgoing message To review your recorded outgoing messageMode Functions Privacy CodesSet DCS Privacy Codes Set Ctcss Privacy CodesTo turn VOX mode on or off NOAA* All Hazards Radio ChannelsVoice Activated Transmit VOX To set VOX sensitivityMemory Locations To program a memory locationTo recall a stored memory channel location ThroughWhile recalling a stored memory location To de-program a memory locationChannel Scan Your microTALK radio can automatically scan channelsTo scan channels If you press the Talk button while scanning, but more thanPrivacy Code Scan Press the Channel Up or Channel Down button toAfter 10 seconds of inactivity, unit starts scan again Memory Location ScanTo scan memory locations To change call settings To change a call tone settingPress the Mode button until To turn roger beep on or offGeneral Specifications Licensing General SpecificationsProduct Service Safety and Trademark AcknowledgementProduct Service Questions Safety Information for microTALK RadiosWarranty Limited One-Year Warranty on Radios & Charger

CXR900C specifications

Cobra Electronics has been a prominent name in the communication and electronics industry for several decades, offering a variety of products designed for convenience and reliability. One of their notable products is the Cobra CXR900C, a two-way radio that stands out for its innovative features and user-friendly design.

The CXR900C is a part of Cobra's commitment to producing quality communication devices, especially popular among outdoor enthusiasts, campers, and those who require reliable communication in remote areas. This two-way radio operates on 22 FRS/GMRS channels, providing users with a wide array of communication options. The flexibility of these channels allows users to easily find a clear frequency, minimizing interference from other radio users.

One of the standout features of the CXR900C is its long-range communication capability, reaching up to 35 miles under ideal conditions. This extended range is further enhanced by the radio's high power output, making it suitable for both urban environments and expansive outdoor settings. The unit is equipped with a built-in rechargeable lithium-ion battery, ensuring users maintain power during extended use.

In addition to its impressive range, the Cobra CXR900C is packed with advanced technologies that enhance user experience. The automatic noise limiter helps improve clarity by filtering out background noise, while the VOX mode allows for hands-free operation. This feature is particularly useful for those who may need their hands free for other tasks while communicating.

Durability is another characteristic of the CXR900C. The device is designed to withstand harsh environments, featuring a rugged construction that includes a weather-resistant design. This makes it ideal for camping trips, hiking, and other outdoor adventures where weather conditions can be unpredictable.

The CXR900C boasts a variety of convenient features such as a built-in flashlight, an easy-to-read display, and 10 NOAA weather channels that keep users updated on changing weather conditions. The functionality of this radio is complemented by an ergonomic design, making it comfortable to hold and use for extended periods.

Overall, the Cobra CXR900C is a versatile two-way radio that incorporates advanced technology, impressive range, and durable construction. Its myriad features make it an essential tool for those who need reliable communication in both everyday use and adventurous settings. With the CXR900C, Cobra Electronics continues to uphold its reputation for quality and reliability in communication devices.
Top Page Image Contents