Cobra Electronics CXR825 To de-program a memory location, Channel Scan, Flash on the display

Page 11

Operation

Mode Button

Mode Functions

To de-program a memory location:

1. Press the Mode button until the

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

Channel Scan

•

Your microTALK radio can automatically scan channels.

 

Memory Icon

Channel Buttons

Lock/Enter Button

Channel 0

Memory icon and the memory location

flash on the display.

2. Press the Channel Up or Channel Down button

to select the memory location

(0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3.Press the Lock/Enter button. The channel numbers will flash on the display.

4. Press the Channel Up or Channel Down button to select Channel 0.

5.Choose one of the following:

a. Press the Lock/Enter button to enter the channel/privacy code in the selected memory location and return to the beginning of memory location options.

b. Press the Mode button to enter the channel/privacy code in the selected memory location and

proceed to other functions on the channel/ privacy code displayed

before you entered mode functions.

While de-programming a memory location,

if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.

Mode Button

Scanning Channels

Channel Buttons

To scan channels:

1.Press the Mode button until the Scan icon and the channel numbers flash on the display.

2.Press the Channel Up or Channel Down button to begin scanning channels.

The radio ignores specific privacy codes while scanning channels.

The Scan icon will continue to be displayed when scan is on. Your radio will continue to scan all channels and stop if an incoming transmission is detected. Your radio will remain on that channel for 10 seconds.

While setting channel scan, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel or channel/privacy code displayed before you entered mode functions.

16

17

Page 10 Page 12
Image 11
Page 10 Page 12
Contents For Assistance Outside the U.S.A Making Life Easier and SaferFor Assistance in the U.S.A For products purchased in the U.S.A. and Canada Product Features Warranty and Trademark AcknowledgementFeatures Trademark AcknowledgementEstimated operation time on full charge 12 hours Avoid exposure to extreme temperaturesCaring for Your microTALK Radio Is on Using Your RadioTurning on Your microTALK Radio Call Button Selectable HighMediumLow Power OutputChannels Listening for a ResponseMicroTALK Range Lock FeatureSignal Strength Meter Auto Squelch/Maximum RangePrivacy Codes Mode FunctionsScrolling through Mode Functions Selected, the display will flash Set DCS Privacy CodesThrough To listen to All Hazards Radio channelsMemory Locations Voice Activated Transmit VOXWhile recalling a stored memory location Press the Mode button toBefore you entered mode functions To recall a stored memory channel locationTo select the memory location To de-program a memory locationChannel Scan Flash on the displayPrivacy Code Scan Radio will remain on that memory location for 10 seconds Memory Location ScanYour microTALK radio can automatically scan up to Location scan is on. Your radio will continueLocation To change call settings Press the Mode buttonRoger Beep Confirmation Tone Call Tone SettingsKeystroke Tones Normal Position General Specifications FCC LicenseSafety Information for microTALK Radios For Products Purchased in the U.S.A Product ServiceProduct Service Questions If you have any questions about operation or installing
Top Page Image Contents