Cobra Electronics CXR825 Auto Squelch/Maximum Range, Lock Feature, Signal Strength Meter

Page 6

Operation

Using Your Radio

 

 

 

Auto Squelch/Maximum Range

Your microTALK radio is equipped with Auto Squelch, which

 

automatically shuts off weak transmissions and unwanted noise

 

due to terrain and conditions. This slightly reduces the Maximum

 

Range at which signals can be heard.

 

You can turn off auto squelch to allow all signals to be

 

received and extend the maximum range of your radio.

 

Light/Max Range

To briefly turn off auto squelch:

 

 

– Press the Light/Max Range button

 

 

for less than five seconds.

 

 

If you hear two beeps, you have turned

 

 

the maximum range extender on (see below).

 

To turn maximum range extender on:

– Press and hold the Light/Max Range button

 

 

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

 

 

Speaker/Microphone/Charge Jack

 

Your microTALK radio can be fitted with an external Speaker/Microphone,

 

 

 

freeing your hands for other tasks. This same jack also serves as the

 

 

connecting point for the wall charger/adapter.

 

 

 

To attach a speaker/microphone:

 

 

Speaker/Microphone/

 

 

Charge Jack

1. Open the speaker/microphone/charge

 

 

tab on top of your microTALK radio.

2. Insert the plug into the speaker/ microphone/charge jack.

To connect a wall charger/adapter:

1.Open the speaker/microphone/charge tab on top of your microTALK radio.

2.Insert the wall charger/adapter plug

into the speaker/microphone/charge jack.

for at least five seconds until you hear

two beeps which indicates the maximum

range extender is on.

To turn maximum range extender off:

Press and release the Light/Max Range button or change channels.

Lock Feature

The Lock feature locks the Channel, Mode, Hi•Low and Power

 

buttons to prevent accidental operation.

 

Signal Strength

Maximum Range

Signal Strength Meter

Your microTALK radio has a Signal Strength

 

Meter that shows the strength of your incoming

 

and outgoing transmissions. The ascending bars

 

next to the signal strength indicate the strength of

 

the signal. The greater the number of bars visible,

 

the stronger the signal. The fewer number of bars

 

visible, the weaker the signal.

 

microTALK Range

 

Lock/Enter Button

Lock Mode

To turn the lock feature on or off:

Press and hold the Lock/Enter button for two seconds.

A double beep sound is used to confirm your lock on or off request. When in Lock mode, the Lock icon will be displayed.

Reduced Range

Reduced Range

Your range will vary depending on terrain and

conditions.

In flat, open country your radio will operate at

maximum range.

Buildings and foliage in the path of the signal can reduce the range of the radio.

Dense foliage and hilly terrain will further reduce the range of the radio.

On FRS channels 8 through 14, your radio automatically switches to low power, which will limit the range the radio can communicate.

Remember, you can achieve maximum range by using maximum range extender. See page 6 for details.

6

7

Image 6
Contents Making Life Easier and Safer For Assistance in the U.S.AFor Assistance Outside the U.S.A Trademark Acknowledgement Product Features Warranty and Trademark AcknowledgementFeatures For products purchased in the U.S.A. and CanadaAvoid exposure to extreme temperatures Caring for Your microTALK RadioEstimated operation time on full charge 12 hours Using Your Radio Turning on Your microTALK RadioIs on Listening for a Response Selectable HighMediumLow Power OutputChannels Call ButtonAuto Squelch/Maximum Range Lock FeatureSignal Strength Meter MicroTALK RangeMode Functions Scrolling through Mode FunctionsPrivacy Codes To listen to All Hazards Radio channels Set DCS Privacy CodesThrough Selected, the display will flashVoice Activated Transmit VOX Memory LocationsTo recall a stored memory channel location Press the Mode button toBefore you entered mode functions While recalling a stored memory locationFlash on the display To de-program a memory locationChannel Scan To select the memory locationPrivacy Code Scan Location scan is on. Your radio will continue Memory Location ScanYour microTALK radio can automatically scan up to Radio will remain on that memory location for 10 secondsTo change call settings Press the Mode button LocationCall Tone Settings Keystroke TonesRoger Beep Confirmation Tone General Specifications FCC License Safety Information for microTALK RadiosNormal Position If you have any questions about operation or installing Product ServiceProduct Service Questions For Products Purchased in the U.S.A