Cisco Systems 1000 manual SIP and SPAs Installed in a Cisco ASR 1006 Router

Chapter 1 Overview: Cisco ASR 1000 Series Aggregation Services Routers SIPs

Identifying Slots and Subslots for SIPs and SPAs

Figure 1-1shows an example of a SIP installed on a Cisco ASR 1006 Router. The router has three chassis slots for SIPs, and can accommodate a total of twelve SPAs.

Figure 1-1 SIP and SPAs Installed in a Cisco ASR 1006 Router

Some commands allow you to display information about the SIP itself, such as show platform, show diag, and show diag subslot. These commands require you to specify the chassis slot location where the SIP that you want information about is installed.

For example, to display status and slot-related information about the SIP installed in any of the chassis slots, enter the following command:

Router# show platform

Chassis type: ASR1006

		Slot	Type	State	Insert time (ago)
---------			-------------------	---------------------	-----------------
0			ASR1000-SIP10	ok	2d21h
0/0			SPA-2X1GE-V2	ok	2d21h
0/1			SPA-2X1GE-V2	ok	2d21h
0/2			SPA-2X1GE-V2	ok	2d21h
0/3			SPA-1XOC12-POS	ok	2d21h
1			ASR1000-SIP10	ok	22:46:22
1/0			SPA-1X10GE-L-V2	ok	22:45:29
1/1			SPA-1XOC12-POS	ok	22:45:26
1/2			SPA-1X10GE-L-V2	ok	22:45:22
1/3			SPA-1XOC12-POS	ok	22:45:18
2			ASR1000-SIP10	ok	1d20h
2/0			SPA-5X1GE-V2	ok	1d20h
2/1			SPA-5X1GE-V2	ok	1d20h
2/2			SPA-5X1GE-V2	ok	1d20h
2/3			SPA-5X1GE-V2	ok	1d20h
		R0	ASR1000-RP1	ok, active	3d20h
		F0	ASR1000-ESP10	ok, active	3d20h
		P0	ASR1006-PWR-AC	ok	3d20h
		Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
	1-4				OL-14126-15