Chapter 1 Overview: Cisco ASR 1000 Series Aggregation Services Routers SIPs
Identifying Slots and Subslots for SIPs and SPAs
P1 | ok | 3d20h | |
Slot | CPLD Version | Firmware Version |
|
0 | 07091401 | 12.2(33r)XN2 |
|
1 | 07091401 | 12.2(33r)XN2 |
|
2 | 07091401 | 12.2(33r)XN2 |
|
R0 | 07082312 | 12.2(33r)XN2 |
|
The following example shows the show platform command output for the ASR 1013 chassis with Cisco
Router# show platform
Chassis type: ASR1013
Slot | Type | State | Insert time (ago) |
0 | ok | 1w0d | |
1 | ok | 1w0d | |
1/1 | ok | 1w0d | |
2 | ok | 1w0d | |
2/1 | ok | 1w0d | |
2/3 | ok | 1w0d | |
3 | ok | 1w0d | |
3/3 | ok | 1w0d | |
4 | ok | 1w0d | |
4/2 | ok | 1w0d | |
4/3 | ok | 1w0d | |
5 | ok | 1w0d | |
R0 | ok, active | 1w0d | |
R1 | ok, standby | 1w0d | |
F0 | ok, active | 1w0d | |
P0 | ok | 1w0d | |
P1 | ps, fail | 1w0d | |
P2 | ok | 1w0d | |
P3 | ps, fail | 1w0d | |
Slot | CPLD Version | Firmware Version |
|
0 | 00200800 | 15.0(1r)S |
|
1 | 00200800 | 15.0(1r)S |
|
2 | 00200800 | 15.0(1r)S |
|
3 | 00200800 | 15.0(1r)S |
|
4 | 00200800 | 15.0(1r)S |
|
5 | 00200800 | 15.0(1r)S |
|
R0 | 10021901 | 15.0(1r)S |
|
R1 | 10021901 | 15.0(1r)S |
|
F0 | 1001270D | 15.0(1r)S |
|
Specifying the SIP Subslot Location for a SPA
SIP subslots begin their numbering with “0” and have a horizontal orientation, as shown in the “SIP and SPA Product Overview” chapter of the Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide.
The Cisco ASR 1000 series SIP supports four subslots for the installation of SPAs. As shown in Figure
•SIP subslot
•SIP subslot
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
|
| ||
|
|