Cisco Systems manual Cisco ASR1000-SIP40 Overview

Chapter 1 Overview: Cisco ASR 1000 Series Aggregation Services Routers SIPs

Cisco ASR 1000 Series SPA Interface Processor Overview

Table 1-5 Cisco ASR1000-SIP10 Physical Specifications (continued)

Description	Specifications
Relative humidity	Operating Humidity Nominal—5% to 85% noncondensing
	Operating Humidity Short Term—5% to 90% noncondensing
Storage temperature	–40°F to 158°F (–40°C to 70°C)

Cisco ASR1000-SIP40 Overview

The Cisco ASR1000-SIP40 supports up to 40 Gbps total bandwidth for the four SPA bays and 46 Gbps sustained through carrier card when utilizing two four-link 6.25GHz ESIs. Following are the features of the Cisco ASR1000-SIP40:

•Supports 40 Gbps of non oversubscribed throughput.

•Compatible with existing and future SPAs, ESPs, and RPs.

•Supports online-insertion-and-removal (OIR) of all SIP-10 SPAs and Cisco ASR1000-SIP40.

•Provides higher port density support of 48 point dual priority, and 96 point single priority.

•Enables enhanced QoS and timestamp support.

•Performs ingress packet prioritization based on Layer 2 or Layer 3 headers.

•Enables the flow-control of the SPAs.

•Distributes line clocking reference from a single SPA to the RPs.

•From Release 3.7.0S onward, the Cisco ASR1000-SIP40 is supported on all the routers that support the Cisco ASR1000-SIP10.

Note The Cisco ASR1000-SIP40 supports four half-height SPAs, two full-height SPAs, and a combination of two half-height and one full-height SPAs. The Cisco ASR1000-SIP40 does not support double-wide SPAs, and double-high SPAs having two connectors.

The LEDs on the modules are the same for both the Cisco ASR1000-SIP10 and Cisco ASR1000-SIP40.

The following sections describe the Cisco ASR1000-SIP40:

•Cisco ASR1000-SIP40 LEDs

•Cisco ASR1000-SIP40 Physical Specifications

Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide

OL-14126-15 1-9