Cobra Electronics Two-Way Radio Mode/Lock, Enter/HiLow Power, To connect a wall charger/adapter

Page 13


	Introduction	Operation	Customer Assistance	Warranty

Dual Function Buttons

Two of the buttons on the microTALK radio have Dual Functions;

Mode/Lock

•Press and release the button to scroll to the next mode function.

•Press and hold the button for two seconds or more to turn the lock function on or off.

Enter/Hi•Low Power

•Press and release the button to enter settings in Function mode.

•Press and release to toggle between high and low power transmission in Standby mode.

Speaker/Microphone/Charge Jack

•

Your microTALK radio can be fitted with an external Speaker/Microphone, freeing your hands for other tasks. This same jack also serves as the connecting point for an optional wall charger/adapter.

Speaker/Microphone/ To attach a speaker/microphone:
ChargeJack	1. Open the speaker/microphone/charge

	tab on top of your microTALK radio.

2. Insert the plug into the speaker/ microphone/charge jack.

To connect a wall charger/adapter:

1.Open the speaker/microphone/charge tab on top of your microTALK radio.

2.Insert the wall charger/adapter plug

into the speaker/microphone/charge jack.

Signal Strength

Signal Strength Meter

•

Your microTALK radio has a Signal Strength Meter that shows the strength of your incoming and outgoing transmissions. The ascending bars next to the signal strength indicate the strength of the signal. The greater the number of bars visible, the stronger the signal. The fewer number of bars visible, the weaker the signal.

7

Image 13

Contents Nothing Comes Close to a Cobra English PR4100WX For Assistance in Canada or the U.S.A Making Life Easier and SaferAutomated Help Desk Customer Assistance OperatorsProduct Features Backlit LCD Display 14 12Page Caring for YourmicroTALKRadio Replace battery compartment cover and belt clipEstimated operation time on full charge 12 hours For charging microTALK radios in desktop charger Using Your RadioPlug 120-volt adapter into electrical outlet Battery Low On your radio and adjust the volumeReplaced if using alkaline batteries Turning on Your microTALK RadioPress and hold the Talk button Communicating with Another PersonChannels Rotate the On/Off Volume knob VolumeSelectable HighLow Power Output Call Button To alert another person that you are callingTo briefly turn off auto squelch To turn the lock feature on or offTo turn maximum range extender on To turn maximum range extender offMode/Lock Enter/HiLow PowerTo connect a wall charger/adapter Scrolling through Mode Functions Mode FunctionsMicroTALK Range Your range will vary depending on terrain and conditionsTo select a privacy code Ctcss Privacy CodesAfter selecting a channel, press To listen to All Hazards Radio channels NOAA* All Hazards Radio ChannelsUse the Channel Up or Channel Down Press the Mode/Lock button to proceed to other functionsVoice Activated Transmit VOX Mode/Lock Button To turn VOX mode on or offChoose one of the following To set VOX sensitivityTo program a memory location Memory LocationsThrough Mode/Lock Button To recall a stored memory channel locationWhile recalling a stored memory location While de-programming a memory location Mode/Lock Button To de-program a memory locationYour microTALK radio can automatically scan channels Channel ScanTo scan privacy codes Privacy Code ScanIf you press the Talkbutton while scanning, but more than Mode/Lock Button To scan memory locations Memory Location ScanMode/Lock Button To change a call tone setting Call ToneSettingsIf you press the Talk button while scanning, but more than Choose one of the following Button to select roger beep on or offFunctions Keystroke TonesFRS/GMRS Frequency Allocation and Compatibility General SpecificationsFCC Licensing and Product Service Questions For Products Purchased in the U.S.A Product Service QuestionsLimited One-Year Warranty on Radios & Charger Warranty and TrademarksTrademark Acknowledgement