Cobra Electronics Two-Way Radio manual Mode/Lock Button To de-program a memory location

Page 20

Mode Functions

Operation

Mode/Lock Button To de-program a memory location:

1.Press the Mode/Lock button until the

Memory icon and the memory location flash on the display.

Memory Icon

Channel Buttons

Enter/Hi-Low Button

Channel 0

2.Press the Channel Up or Channel Down button to select the memory location (0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3.Press the Enter/Hi•Low button. The channel numbers will flash on the display.

4.Press the Channel Up or Channel Down button to select Channel 0.

5.Choose one of the following:

a.Press the Enter/Hi•Low button to enter the channel/privacy code in the selected memory location and return to the beginning of memory location options.

b.Press the Mode/Lock button to enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/privacy code displayed before you entered mode functions.

While de-programming a memory location,

if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.

14

Image 20

Contents Nothing Comes Close to a Cobra English PR4100WX Making Life Easier and Safer For Assistance in Canada or the U.S.AAutomated Help Desk Customer Assistance OperatorsProduct Features 14 12 Backlit LCD DisplayPage Estimated operation time on full charge 12 hours Replace battery compartment cover and belt clipCaring for YourmicroTALKRadio Plug 120-volt adapter into electrical outlet Using Your RadioFor charging microTALK radios in desktop charger On your radio and adjust the volume Battery LowReplaced if using alkaline batteries Turning on Your microTALK RadioChannels Communicating with Another PersonPress and hold the Talk button Volume Rotate the On/Off Volume knobSelectable HighLow Power Output Call Button To alert another person that you are callingTo turn the lock feature on or off To briefly turn off auto squelchTo turn maximum range extender on To turn maximum range extender offTo connect a wall charger/adapter Enter/HiLow PowerMode/Lock Mode Functions Scrolling through Mode FunctionsMicroTALK Range Your range will vary depending on terrain and conditionsAfter selecting a channel, press Ctcss Privacy CodesTo select a privacy code NOAA* All Hazards Radio Channels To listen to All Hazards Radio channelsUse the Channel Up or Channel Down Press the Mode/Lock button to proceed to other functionsMode/Lock Button To turn VOX mode on or off Voice Activated Transmit VOXChoose one of the following To set VOX sensitivityMemory Locations To program a memory locationWhile recalling a stored memory location Mode/Lock Button To recall a stored memory channel locationThrough Mode/Lock Button To de-program a memory location While de-programming a memory locationChannel Scan Your microTALK radio can automatically scan channelsPrivacy Code Scan To scan privacy codesIf you press the Talkbutton while scanning, but more than Memory Location Scan Mode/Lock Button To scan memory locationsIf you press the Talk button while scanning, but more than Call ToneSettingsMode/Lock Button To change a call tone setting Button to select roger beep on or off Choose one of the followingFunctions Keystroke TonesGeneral Specifications FRS/GMRS Frequency Allocation and CompatibilityFCC Licensing and Product Service Questions Product Service Questions For Products Purchased in the U.S.ATrademark Acknowledgement Warranty and TrademarksLimited One-Year Warranty on Radios & Charger