Cobra Electronics Two-Way Radio Using Your Radio, Plug 120-volt adapter into electrical outlet

Page 8

Operation

Insert Radio(s)

Using Your Radio

For charging microTALK radio(s) in desktop charger:

1. Insert radio(s) into desktop charger as shown.

2. Insert round connector of 120-volt adapter into jack on back of charger.

3.Plug 120-volt adapter into electrical outlet.

If charging light is not on, check position of radio. Radio should be upright. The charge indicator light will stay on as long as the radio is in the charging well, even after the batteries are fully charged.

It normally takes about 15 hours to fully recharge batteries. Batteries will not be damaged if they stay in the charging well longer than that.

Note: To charge a single radio, you can bypass the desktop charger and simply insert the wall adapter’s round connector directly into the speaker/microphone/charge jack located on the top of the radio.

Use only the supplied rechargeable batteries and charger for recharging your Cobra microTALK radio.

Cobra recommends your radio is turned off while being charged. Non-rechargeable alkaline batteries can also be used in your radio.

Quick Start

1.Rotate the On/Off Volume knob to turn on your radio.

2.Press the Channel Up or Channel Down button to select a channel.

Both radios must be tuned to the same channel/privacy code to communicate.

3.Press and hold the Talk button while speaking into the microphone.

4.When finished talking, release the Talk button and listen for a response.

2

Image 8

Contents Nothing Comes Close to a Cobra English PR4100WX Making Life Easier and Safer For Assistance in Canada or the U.S.AAutomated Help Desk Customer Assistance OperatorsProduct Features 14 12 Backlit LCD DisplayPage Estimated operation time on full charge 12 hours Replace battery compartment cover and belt clipCaring for YourmicroTALKRadio Plug 120-volt adapter into electrical outlet Using Your RadioFor charging microTALK radios in desktop charger On your radio and adjust the volume Battery LowReplaced if using alkaline batteries Turning on Your microTALK RadioChannels Communicating with Another PersonPress and hold the Talk button Volume Rotate the On/Off Volume knobSelectable HighLow Power Output Call Button To alert another person that you are callingTo turn the lock feature on or off To briefly turn off auto squelchTo turn maximum range extender on To turn maximum range extender offTo connect a wall charger/adapter Enter/HiLow PowerMode/Lock Mode Functions Scrolling through Mode FunctionsMicroTALK Range Your range will vary depending on terrain and conditionsAfter selecting a channel, press Ctcss Privacy CodesTo select a privacy code NOAA* All Hazards Radio Channels To listen to All Hazards Radio channelsUse the Channel Up or Channel Down Press the Mode/Lock button to proceed to other functionsMode/Lock Button To turn VOX mode on or off Voice Activated Transmit VOXChoose one of the following To set VOX sensitivityMemory Locations To program a memory locationWhile recalling a stored memory location Mode/Lock Button To recall a stored memory channel locationThrough Mode/Lock Button To de-program a memory location While de-programming a memory locationChannel Scan Your microTALK radio can automatically scan channelsPrivacy Code Scan To scan privacy codesIf you press the Talkbutton while scanning, but more than Memory Location Scan Mode/Lock Button To scan memory locationsIf you press the Talk button while scanning, but more than Call ToneSettingsMode/Lock Button To change a call tone setting Button to select roger beep on or off Choose one of the followingFunctions Keystroke TonesGeneral Specifications FRS/GMRS Frequency Allocation and CompatibilityFCC Licensing and Product Service Questions Product Service Questions For Products Purchased in the U.S.ATrademark Acknowledgement Warranty and TrademarksLimited One-Year Warranty on Radios & Charger