Operation
Light/Max Range
Using Your Radio
Display Illumination
|
|
|
|
|
|
| Introduction | Operation | Customer Assistance | Warranty |
|
| Lock Button | Lock Function |
| ||
To Illuminate Your Display:
•
• |
The Lock function locks the Channel, |
1.Press and release the Light/Max Range button to illuminate the display for ten (10) seconds.
Mode, and Power buttons to prevent accidental operation.
Light/Max Range
Auto Squelch/Maximum Range
•
Your microTALK® radio is equipped with Auto Squelch, which automatically shuts Off weak transmissions and unwanted noise due to terrain, conditions, or if you’ve reached your maximum range limit.
You can temporarily turn Off Auto Squelch or turn On Maximum Range Extender, allowing all signals to be received and extending the maximum range of your radio.
To Temporarily Turn Off Auto Squelch:
1.Press the Light/Max Range button less than five (5) seconds.
If you hear two (2) beeps, you have turned the Maximum Range Extender On (see below).
To turn Maximum Range Extender On:
1.Press and hold the Light/Max Range button for at least five (5) seconds until you hear two (2) beeps which indicates the Maximum Range Extender is On.
To Turn Maximum Range Extender Off:
1.Press and release the Light/Max Range button or change channels.
Lock Icon
Speaker/Microphone
To Turn the Lock On or Off:
1.Press and hold the Lock button for two (2) seconds.
A double beep sound is used to confirm your Lock On or Off request. When in Lock Mode, the Lock icon will be displayed.
Speaker/Microphone Jack
•
Your microTALK® radio can be fitted with an external Speaker/Microphone, freeing your hands for other tasks. Contact your local Cobra® dealer or Cobra® directly for optional accessories. Only Cobra® authorized accessories are recommended.
To Attach Your Speaker/Microphone:
1.Open the Speaker/Microphone tab on top of your microTALK® radio.
2.Insert the plug into the Speaker/ Microphone jack.
14 English | Nothing comes close to a Cobra™ 15 |