Cobra Electronics LI6700WX Press the Channel Up or Channel Down button to, Privacy Code Scan

Page 12

Mode Functions

Operation

During channel scan (while receiving an incoming transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on that channel. Your radio will remain on that channel and return to Standby mode.

b. Press the Channel Up or Channel Down button to

 

 

Operation

 

 

 

 

Introduction

Customer Assistance

Warranty

 

Privacy Code Scan

•

Your microTALK radio can automatically scan the Privacy Codes (either CTCSS 01 through 38 or DCS 01 through 104) within one channel. Only one set of privacy codes (CTCSS or DCS) can be scanned at a time.

Select Channel To scan privacy codes:

resume scanning channels.

If you press the Talk button while scanning, but more than

10 seconds after receiving a transmission, you will transmit on the channel on which you last received a transmission. This will return the radio to Standby mode.

If you do not press any button within 10 seconds after receiving a scanned transmission, your radio will automatically resume scanning channels.

During channel scan (while not receiving a transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on the channel or channel/privacy code that was displayed before you entered mode functions or the channel on which, during scanning, you last received a transmission. This will then return the radio to Standby mode.

b. Press the Mode button to proceed to set privacy

code scan on the channel that was either displayed before you entered mode functions or on which, during channel scanning, you last received a transmission (see page 19 for further details).

c. Press the Lock/Enter button to return to Standby mode on the channel/privacy code that was displayed before you entered mode functions or the channel on which, during scanning, you last received a transmission.

Mode Button

Scan Privacy

Channel Buttons

1.While in Standby mode, press the Channel Up or Channel Down button to choose the channel on which you wish to scan privacy codes.

2.Press the Mode button until either the CTCSS or the DCS icon appears on the display and the Scan icon and the privacy code numbers flash on the display.

3.Press the Channel Up or Channel Down button to begin scanning privacy codes within the channel you selected.

The Scan icon will continue to be displayed when privacy code scan is on. Your radio will continue to scan privacy codes and stop as an incoming transmission is detected. Your radio will remain on that channel/privacy code for 10 seconds.

While setting privacy code scan, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code that was displayed before you entered mode functions.

18

19

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Making Life Easier Automated Help DeskCustomer Assistance Operators QuestionsProduct Features Warranty Trademark Features Backlit LCD DisplayLimited One-Year Warranty on Radios & Charger For Products Purchased in the U.S.AAvoid exposure to extreme temperatures Replace battery compartment cover and belt clipCaring for Your microTALK Radio Estimated operation time on full charge 12 hoursUsing Your Radio For charging microTALK radios in desktop chargerTo switch from high to medium to low power Listening for a ResponseCall Button To alert another person that you are calling To Illuminate DisplayLock/Enter Button To turn the lock feature on or off Light/Max Range To briefly turn off auto squelchTo turn maximum range extender on To attach a speaker/microphoneMode Functions Scrolling through Mode FunctionsPrivacy Codes Standby mode NOAA* All Hazards Radio ChannelsSmall numbers flash on the display ThroughMode Button To turn VOX mode on or off Mode Button To program a memory locationVoice Activated Transmit VOX Memory LocationsPress the Mode button to Choose one of the followingTo recall a stored memory channel location While recalling a stored memory locationTo de-program a memory location Channel ScanPress the Mode button to proceed to set privacy Press the Channel Up or Channel Down button toPrivacy Code Scan Select Channel To scan privacy codesMemory Location Scan Press and hold the Talk button to communicate onTo scan memory locations To change call settings VibrAlert and Call AlertMode Button To change a call tone setting Mode Button To change keystroke tonesTo turn roger beep on or off General Specifications FCC License General SpecificationsSafety Information for microTALK Radios Normal PositionProduct Service Product Service QuestionsFor Products Purchased in the U.S.A
Top Page Image Contents