Cobra Electronics LI6700WX Listening for a Response, To switch from high to medium to low power

Page 5
Selectable High•Medium•Low Power Output

Using Your Radio

Operation

Channel Buttons Channels

•

 

With the radio on, select any of the

22 channels by pressing the Channel Up or Channel Down button.

Introduction

Operation

Customer Assistance Warranty

Hi-Low Button

•

When in close proximity to another party or during favorable conditions, you can switch from High to Medium to Low Power to extend battery life.

Channel Number

Both radios must be tuned to the same channel to communicate.

Channels 1 through 7 are shared by FRS and GMRS. Channels 8 through 14 are FRS only. Channels 15 through 22 are GMRS only.

Hi PowerIcon

This feature applies to GMRS Channels 1 through 7 and 15 through 22 only. Channels 8 through 14 operate exclusively on low power.

Listening

Call Button

See page 26 for FRS/GMRS frequency allocations and compatibility charts.

Listening for a Response

•

Release the Talk button to receive incoming transmissions. Your microTALK radio is always in Standby mode while the Talk or Call buttons are not pressed.

Call Button

•

To alert another person that you are calling:

–Press and release the Call button.

The other person will hear a two second call tone. This tone is used only to establish voice communications.

See page 24 on how to select from 10 available call tone settings.

MediumPower

Low PowerIcon

Light/Max Range

To switch from high to medium to low power:

–Press and release the Hi•Low button.

When in High Power and using Channels 1 through 7 and 15 through 22, the Hi icon will be visible in the LCD display.

When in Medium Power and using Channels 1 through 7 and 15 through 22, the Med icon will be visible in the LCD.

When in Low Power or while using channels 8 through 14, the Low icon will be visible in the display.

To Illuminate Display

•

Press and release the Light/Max Range button to illuminate the display for

10 seconds.

4

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Automated Help Desk Making Life EasierCustomer Assistance Operators QuestionsFeatures Backlit LCD Display Product Features Warranty TrademarkLimited One-Year Warranty on Radios & Charger For Products Purchased in the U.S.AReplace battery compartment cover and belt clip Avoid exposure to extreme temperaturesCaring for Your microTALK Radio Estimated operation time on full charge 12 hoursFor charging microTALK radios in desktop charger Using Your RadioListening for a Response To switch from high to medium to low powerCall Button To alert another person that you are calling To Illuminate DisplayLight/Max Range To briefly turn off auto squelch Lock/Enter Button To turn the lock feature on or offTo turn maximum range extender on To attach a speaker/microphonePrivacy Codes Mode FunctionsScrolling through Mode Functions NOAA* All Hazards Radio Channels Standby modeSmall numbers flash on the display ThroughMode Button To program a memory location Mode Button To turn VOX mode on or offVoice Activated Transmit VOX Memory LocationsChoose one of the following Press the Mode button toTo recall a stored memory channel location While recalling a stored memory locationChannel Scan To de-program a memory locationPress the Channel Up or Channel Down button to Press the Mode button to proceed to set privacyPrivacy Code Scan Select Channel To scan privacy codesTo scan memory locations Memory Location ScanPress and hold the Talk button to communicate on VibrAlert and Call Alert To change call settingsTo turn roger beep on or off Mode Button To change a call tone settingMode Button To change keystroke tones General Specifications General Specifications FCC LicenseSafety Information for microTALK Radios Normal PositionFor Products Purchased in the U.S.A Product ServiceProduct Service Questions
Top Page Image Contents