Cobra Electronics PR3000DXC owner manual Mode Functions

Page 9

Mode Functions

Operation

CTCSS Privacy Codes

•

CTCSS (Continuous Tone Coded Squelch System) is an advanced tone coding system allowing you to select one of 38 privacy codes to reduce interference from other users on the channel.

If you are using a privacy code, both radios must be tuned to the same channel and privacy code to communicate. Each channel will remember the last privacy code you selected.

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

Voice Activated Transmit (VOX)

•

In VOX mode, your microTALK® radio can be used “hands-free,” automatically transmitting when you speak. You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise.

Mode Button

To turn VOX mode on or off:

 

1. Press the Mode button until the VOX icon

 

flashes on the display. The current on or off

 

setting is displayed.

Mode Button

To select a privacy code:

 

1. After selecting a channel, press the Mode

 

button until the small numbers next to the

 

channel number flashes on the display.

VOX Icon

2.

Press the Channel Up or Channel Down

 

button to turn VOX on or off.

3.

Choose one of the following:

 

a. Press the Mode button to enter the

Privacy Code

Channel Button

2. Press the Channel Up or Channel Down

button to select a privacy code. You can hold

the Up or Down button for fast advance.

3. When your desired privacy code is displayed,

choose one of the following:

a. Press the Mode button to enter the new

setting and proceed to other functions.

b. Press the Lock button to enter the new

setting and return to Standby mode.

c. Do not press any buttons for 15 seconds

Channel Button

Mode Button

selected on or off setting and proceed

to other functions.

b. Press the Lock button to enter the

selected on or off setting and return

to Standby mode.

To set the sensitivity:

1.Press the Mode button until the VOX icon flashes and the current sensitivity level is displayed.

to enter the new setting and return to

Standby mode.

VOX Sensitivity Level

Channel Button

The current sensitivity level is displayed with letters “LE” and a Number 01 through 05, with Number 05 being the most sensitive level and Number 01 being the least sensitive level.

2.Press the Channel Up or Channel Down button to change the setting.

3.Choose one of the following:

a.Press the Mode button to enter the selected setting and proceed to other functions.

b.Press the Lock button to enter the selected setting and return to Standby mode.

8 English

Nothing comes close to a Cobra™ 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents PR3000DXC For Assistance in Canada or the U.S.A Making Life Easier and SaferAutomated Help Desk Customer Assistance OperatorsProduct Features Features Batteries To install or replace batteries Avoid exposure to extreme temperaturesCaring for Your microTALK Radio Latch and sliding clip upUsing Your Radio Selectable HighLow Power Output Volume To adjust the volumeTo switch from high to low power Call Button To alert another person that you are callingSignal Strength Signal Strength Meter Scrolling through Mode FunctionsSpeaker/Microphone Jack Speaker/Microphone To attach your speaker/microphoneMode Functions Your microTALK radio can automatically scan channels Channel ScanTo scan channels English Nothing comes close to a CobraPrivacy Code Scan This will return the radio to Standby modePress and hold the Talk button to communicate on that To scan privacy codesTo change a call tone setting To change call settingsVibrAlert and Call Tones Roger Beep Confirmation ToneGeneral Specifications General SpecificationsSafety Information for microTALK Radios LicensingProduct Service Licensing and Product ServiceLimited One-Year Warranty Warranty
Top Page Image Contents