Mode Functions
Operation
VibrAlert® and Call Tones
•
Your microTALK® radio can alert you to incoming signals by sounding an audible call tone, by vibrating silently or both.
|
|
|
|
Introduction | Operation | Customer Assistance | Warranty |
Roger Beep Confirmation Tone
•
Your listener will hear an audible tone when you release the Talk button. This alerts the other party that you are finished talking and
Mode Button
Channel Button
To change call settings:
1.Press the Mode button until the Call Setting icon flashes on the display. The current setting (vibrate + ring, vibrate only or ring only)
is displayed.
2.Press the Channel Up or Channel Down button to change the call setting.
3.Choose one of the following:
VibrAlert® + Ring
VibrAlert® Only
Ring Only
it is OK for them to speak.
Mode Button |
| To turn Roger Beep on or off: | |
| 1. | Press the Mode button until the | |
|
|
| Roger Beep icon flashes on the display. |
|
|
| The current on or off setting is displayed. |
| 2. | Press the Channel Up or Channel Down | |
Roger Beep On | |||
|
|
| button to select roger beep on or off. |
|
| 3. Choose one of the following: | |
|
|
| a. Press the Mode button to enter |
|
|
| the new setting and proceed to |
Channel Button |
|
| |
|
|
| other functions. |
b. Press the Lock button to enter
a. Press the Mode button to enter the new setting
and proceed to other functions.
b. Press the Lock button to enter the new setting and return to Standby mode.
•
You can choose between 10 different Call Tone settings to transmit a unique call alert.
the new setting and return to Standby mode.
Keystroke Tones
•
With Keystroke Tones turned on, your radio will sound beeps each time you press a button or change a setting.
Mode Button | To change keystroke tones: |
| 1. Press the Mode button until the Keystroke |
| Tones icon flashes on the display. The current |
Mode Button
To change a call tone setting:
on or off setting is displayed. |
Call Tone Setting
Channel Button
1.Press the Mode button until the letter “C” and the current call tone Number (01 through 10) is displayed.
2.Press the Channel Up or Channel Down button to hear the other call tone settings.
3.Choose one of the following:
a.Press the Mode button to enter the new setting and proceed to other functions.
b.Press the Lock button to enter the new setting and return to Standby mode.
Keystroke Tones On
Channel Button
2.Press the Channel Up or Channel Down button to turn keystroke tones on or off.
3.Choose one of the following:
a.Press the Mode button to enter the new setting and return to Standby mode.
b.Press the Lock button to enter the new setting and return to Standby mode.
14 English
Nothing comes close to a Cobra™ 15