Cobra Electronics PR3100DX owner manual Through, To Recall a Stored Memory Channel Location

Page 8
4. Press the Channel Up or Channel Down button to select a channel (1 through 22).
5. Press the Lock button. The privacy code numbers will flash on the display.
6. Press the Channel Up or Channel Down button to select a privacy code (0 to 38).
Lock Button
3. Press the Lock button to enter a new memory location or edit an already programmed memory location. The channel numbers
will flash on the display.
Channel Button
If a location has been programmed before, its associated channel/privacy code will be shown on the display.
Memory Icon
1. Press the Mode button until the Memory icon and the memory location flash on the display.
2. Press the Channel Up or Channel Down button to select the memory location (0 through 9).
Mode Button
To Program A Memory Location:
Mode Functions
Operation
Ten (10) Memory Locations
•
Your microTALK® radio has Ten (10) Memory Locations for storing your most frequently used channels and channel/privacy codes. These Memory Locations can be selected individually or can be scanned. (See page 17 for memory location scan.)

Introduction

Operation

Customer Assistance Warranty

While setting a memory location, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.

7.Choose one (1) of the following:

a.Press the Lock button to enter the channel/privacy code

in the selected memory location and return to the beginning of memory location options.

b.Press the Mode button to enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/privacy code displayed before you entered mode functions.

c.Press the Talk button to enter the channel/privacy code in the selected memory location and return to Standby mode on the selected memory location.

Mode Button

Memory Icon

Channel Button

To Recall A Stored Memory Channel Location:

1.Press the Mode button until the Memory icon and the memory location number flash on the display.

2.Press the Channel Up or Channel Down button to select a memory location

(0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3.Press the Talk button to return to Standby mode on the selected memory location.

Pressing the Lock button will put you in “program a memory location.”

While recalling a stored memory location, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.

10 English

Nothing comes close to a Cobra™ 11

Page 7 Page 9
Image 8
Page 7 Page 9
Contents PR 3100 DX Making Life Easier And Safer For Assistance In The U.S.AAutomated Help Desk Customer Assistance OperatorsProduct Features FeaturesBatteries To Install Or Replace Batteries Caring For Your microTALK RadioUsing Your Radio Volume To Adjust The Volume Selectable HighLow Power OutputTo Switch From High To Low Power Call ButtonScrolling Through Mode Functions Signal Strength Signal Strength MeterSpeaker/Microphone Jack Speaker/Microphone To Attach Your Speaker/MicrophoneMode Functions Through To Recall a Stored Memory Channel LocationTo Scan Channels To De-Program a Memory LocationChannel Scan To Scan Privacy Codes Press and hold the Talk button to communicate on thatPrivacy Code Scan This will return the radio to Standby mode You entered mode functionsMemory Location Scan To Scan Memory LocationsTo Change Call Settings Setting vibrate + ringChange the call setting Vibrate only, or ring onlyPower Supply Licensing And Service Product Service QuestionsFor Products Purchased In The U.S.A For Products Purchased Outside The U.S.AWarranty And Accessories Limited 1-Year WarrantyOptional Accessories Ordering From U.S.ACobra line of quality products includes
Top Page Image Contents