Operation
Mode Button
Mode Functions
To De-Program A Memory Location:
1. Press the Mode button until the Memory icon |
Introduction | Operation | Customer Assistance Warranty |
Channel Scan
•
Your microTALK® radio can automatically scan channels.
Memory Icon
Channel Button
Lock Button
Channel 0
and the memory location flash on the display. |
2. Press the Channel Up or Channel Down |
button to select the memory location |
(0 through 9). |
If a location has been programmed before, its associated channel/privacy code will be shown on the display.
3.Press the Lock button. The channel numbers will flash on the display.
4.Press the Channel Up or Channel Down button to select Channel 0.
5.Choose one (1) of the following:
a.Press the Lock button to enter the channel/privacy code in the selected memory location and return to the beginning of memory location options.
b.Press the Mode button to enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/privacy code displayed before you entered mode functions.
While de-programming a memory location,
if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.
Mode Button
Scanning Channels
Channel Button
To Scan Channels:
1.Press the Mode button until the Scan icon and the channel numbers flash on the display.
2.Press the Channel Up or Channel Down button to begin scanning channels.
The radio ignores specific privacy codes while scanning channels.
The Scan icon will continue to be displayed when scan is On. Your radio will continue to scan all channels and stop if an incoming transmission is detected. Your radio will remain on that channel for ten (10) seconds.
While setting channel scan, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel or channel/privacy code displayed before you entered mode functions.
12 English | Nothing comes close to a Cobra™ 13 |