Cobra Electronics LI 5600DX owner manual Mode Functions General Specifications, Call Tone Settings

Page 15

10289_LI5600DX_PH2 8/10/07 11:28 AM Page 24

Mode Functions and

General Specifications

Operation

10 Call Tone Settings

You can choose from 10 different call tone settings to transmit a unique call alert.

Introduction

Operation

Customer Assistance Warranty

Keystroke Tones

With Keystroke Tones turned on, your radio will sound beeps each time you press a button or change a setting.

Mode Button

Call Tone Setting

Channel Buttons

To change a call tone setting:

1.Press the Mode button until the

letter “C” and the current call tone number (01 through 10) is displayed.

2.Press the Channel Up or Channel Down button to hear the other call tone settings.

3.Choose one of the following:

a.Press the Mode button to enter the new setting and proceed to other functions.

b.Press the Lock/Enter button to enter the new setting and return to Standby mode.

Mode Button

Keystroke Tones On

Channel Buttons

To change keystroke tones:

1.Press the Mode button until the Keystroke Tones icon flashes on the display. The current on or off setting is displayed.

2.Press the Channel Up or Channel Down button to turn keystroke tones on or off.

3.Choose one of the following:

a.Press the Mode button to enter the new setting and return to Standby mode.

b.Press the Lock/Enter button to enter the new setting and return to Standby mode.

Roger Beep Confirmation Tone

Roger Beep is an audible tone that your listener will hear when you release the Talk button. This alerts the other party that you are finished talking and it is OK for them to speak.

Mode Button

Roger Beep On

Channel Buttons

To turn roger beep on or off:

1.Press the Mode button until the

Roger Beep icon flashes on the display. The current on or off setting is displayed.

2.Press the Channel Up or Channel Down button to select roger beep on or off.

3.Choose one of the following:

a.Press the Mode button to enter

the new setting and proceed to other functions.

b.Press the Lock/Enter button to enter the new setting and return to Standby mode.

 

 

 

 

24

Nothing Comes Close to a Cobra® 25

Image 15
Contents Customer Assistance Operators Making Life Easier and SaferFor Assistance in the U.S.A Automated Help DeskTrademark Acknowledgement Product FeaturesWarranty and Trademark Acknowledgement FeaturesReplace battery compartment cover and belt clip Caring for Your microTALK RadioEstimated operation time on full charge 10 hours Plug 120-volt adapter into electrical outlet Using Your RadioFor charging microTALK radios in desktop charger Insert radios into desktop charger as shownTo Illuminate Display ChannelsListening for a Response Call ButtonMicroTALK Range Lock FeatureSignal Strength Meter Auto Squelch/Maximum RangeMode Functions Scrolling through Mode FunctionsPrivacy Codes To select a DCS privacy code Set Ctcss Privacy CodesTo select a Ctcss privacy code Set DCS Privacy CodesTo set VOX sensitivity To turn VOX mode on or offVoice Activated Transmit VOX Memory LocationsDisplay Press the Mode button toChoose one of the following To recall a stored memory channel locationThrough To de-program a memory locationChannel Scan Flash on the displayPress the Mode button to proceed to set privacy Press the Channel Up or Channel Down button toPrivacy Code Scan To scan memory locations Memory Location ScanVibrAlert and Call Alert To change call settingsRoger Beep Confirmation Tone Mode Functions General SpecificationsCall Tone Settings Keystroke TonesGeneral Specifications General Specifications FCC LicenseProduct Service Questions Product Service