Cobra Electronics LI 5600DX owner manual Set Ctcss Privacy Codes, To select a Ctcss privacy code

Page 8

10289_LI5600DX_PH2 8/10/07 11:28 AM Page 10

Mode Functions

Operation

Set CTCSS Privacy Codes

•

Mode Button

To select a CTCSS privacy code:

 

1. After selecting a channel, press the

 

Mode button until the CTCSS icon appears

 

and the small numbers flash on the display

CTCSS Privacy Code

(01 through 38).

 

 

NOTE

 

If DCS is turned on at the channel

 

selected, the display will flash the

Channel Buttons

CTCSS icon and “OFF.” To switch from

DCS to CTCSS, press the Channel Up

 

 

or Channel Down button while the

 

display is flashing “OFF.” The display

 

will then show the small numbers

 

flashing and you will then be able

 

to proceed to step 2.

2.Press using the Channel Up or Channel Down button to select a CTCSS privacy code. You can hold the Up or Down button for fast advance.

3.When your desired CTCSS privacy code is displayed, choose one of the following:

a.Press the Mode button to enter the new setting and proceed to other functions.

b.Press the Lock/Enter button to enter the new setting and return to Standby mode.

c.Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode.

Introduction

Operation

Customer Assistance Warranty

Set DCS Privacy Codes

•

Mode Button

To select a DCS privacy code:

 

1. After selecting a channel, press the Mode

 

button until the DCS icon appears and the

 

small numbers flash on the display

DCS Privacy Code

(01 through 104).

 

 

NOTE

 

If CTCSS is turned on at the channel

 

selected, the display will flash the

Channel Buttons

DCS icon and “OFF.” To switch from

CTCSS to DCS, press the Channel Up

 

 

or Channel Down button while the

 

display is flashing “OFF.” The display

 

will then show the small numbers

 

flashing and you will then be able

 

to proceed to step 2.

2.Press using the Channel Up or Channel Down button to select a DCS privacy code. You can hold the Up or Down button for fast advance.

3.When your desired DCS privacy code is displayed, choose one of the following:

a.Press the Mode button to enter the new setting and proceed to other functions.

b.Press the Lock/Enter button to enter the new setting and return to Standby mode.

c.Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode.

 

 

 

 

10

Nothing Comes Close to a Cobra® 11

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Making Life Easier and Safer For Assistance in the U.S.AAutomated Help Desk Customer Assistance OperatorsProduct Features Warranty and Trademark AcknowledgementFeatures Trademark AcknowledgementEstimated operation time on full charge 10 hours Replace battery compartment cover and belt clipCaring for Your microTALK Radio Using Your Radio For charging microTALK radios in desktop chargerInsert radios into desktop charger as shown Plug 120-volt adapter into electrical outletChannels Listening for a ResponseCall Button To Illuminate DisplayLock Feature Signal Strength MeterAuto Squelch/Maximum Range MicroTALK RangePrivacy Codes Mode FunctionsScrolling through Mode Functions Set Ctcss Privacy Codes To select a Ctcss privacy codeSet DCS Privacy Codes To select a DCS privacy codeTo turn VOX mode on or off Voice Activated Transmit VOXMemory Locations To set VOX sensitivityPress the Mode button to Choose one of the followingTo recall a stored memory channel location DisplayTo de-program a memory location Channel ScanFlash on the display ThroughPrivacy Code Scan Press the Mode button to proceed to set privacyPress the Channel Up or Channel Down button to Memory Location Scan To scan memory locationsTo change call settings VibrAlert and Call AlertMode Functions General Specifications Call Tone SettingsKeystroke Tones Roger Beep Confirmation ToneGeneral Specifications FCC License General SpecificationsProduct Service Product Service Questions
Top Page Image Contents